Just bought a depth camera from Orbbec and I'm having issues installing the driver. The installation goes through without errors but windows is...
Hello, I'd like to setup the PWM on the x86 using python but I have no idea what to do! Would appreciate any help. I am totally clueless. I know...
Has anyone figured out how to enable a Intel AX200 WiFi module on the Udoo x86 Ultra running an Android OS? Or on any device running Android? I...
Hello, are there are build examples of NAS builds with the X86? I hardly find any information, disccusion or blogs about it? stefan
I am running a simple script on the Arduino that is supposed to output to serial (/dev/ttyACM0). It works great in the Arduino IDE and can even...
I am attempting to run a sketch on my Udoo X86 built-in Arduino using the Arduino IDE. After opening the IDE, I enter in the sketch and attempt to...
Hello guys, I hope you can help me out with two questions! The first one pertains to the instructions on the Udoo x86 docs to get CEC-HDMI...
Good Day Udoo forum members, I've been thrown in a situation where a well-vetted & recommended Electronic Engineer in my region created a PCB for...
Hi, My first post in this forum. It is nice to be apart of the UDOO community. My question is about a MCP2515 module board. This runs over SPI. I...
Hi all, I have gotten close to getting my autopc with the X86 up, there's just two small problems. First, Windows wants to set my res to high for...
Hello friends. I set up the system correctly. Partly for sure. I tried to boot from the flash memory. I failed. I also tried to open the Boot...
Hi, Is it possible to connect other I2C sensors (in my case a BME280 from Adafruit) to the I2C of the brick? Is there somewhere a description what...
I've installed Windows 10 and using OBS Studio to stream video from my USB HDMI Capture card to Youtube. The image is 1920x1080 and OBS Studio...
I assume that all the ground pins of the x86 board are electrically connected to each other, right? Because I am relatively new to electronics (I...
Hello everybody! First of all congratulations for the effort and I wish you make great progress in the near future! I have a couple of questions...
I purchased the original fan for the x86 at the udoo shop. It arrived today and right upon installation i realized something strange: it turns on...
I see that there are 3D design files for the x86. https://www.udoo.org/docs-x86/Hardware_Reference/Resources.html Are there files for x86...
The New Udoo X86 Metal Case has a proper power button.
Hello!! Today when I turned on my Udoo, it would not respond to ssh login, then I noticed that ethernet was not blinking, however the green led...
Hi, I'm unable to connect x86 to the cloud. I've been following the guide on udoo docs page, i'm using Ubuntu 17.10 from here...
Separate names with a comma.
