New Profile Posts

  1. Paulo Damazio
    Paulo Damazio
    palpites la liga
  2. ccs_hello
  3. kacem berriah
    kacem berriah waltervl
    Hello

    We ask for help, the card UDOO neo doesn't boot, we followed the step-by-step instructors on the website. nothing is displayed on the monitor.
    We tried with two different SD cards, and have checked the power supply, and always not working. we used an external power supply with 12V and see how much current it consumes, it displays 0.9A only

    Could you please give us any suggestions?

    thank you in advance
  4. kacem berriah
    kacem berriah Laura
    Hello

    We ask for help, the card UDOO neo doesn't boot, we followed the step-by-step instructors on the website. nothing is displayed on the monitor.
    We tried with two different SD cards, and have checked the power supply, and always not working. we used an external power supply with 12V and see how much current it consumes, it displays 0.9A only

    Could you please give us any suggestions?

    thank you in advance
  5. kacem berriah
    kacem berriah graugans
    Hello

    We ask for help, the card UDOO neo doesn't boot, we followed the step-by-step instructors on the website. nothing is displayed on the monitor.
    We tried with two different SD cards, and have checked the power supply, and always not working. we used an external power supply with 12V and see how much current it consumes, it displays 0.9A only.

    Could you please give us any suggestions?

    thank you in advance
  6. kacem berriah
    kacem berriah ccs_hello
    Hello

    We ask for help, the card UDOO neo doesn't boot, we followed the step-by-step instructors on the website. nothing is displayed on the monitor.
    We tried with two different SD cards, and have checked the power supply, and always not working. we used an external power supply with 12V and see how much current it consumes, it displays 0.9A only

    Could you please give us any suggestions?

    thank you in advance
  7. maverik
    maverik waltervl
    How to reinstall a fresh different version of Ubuntu on an already installed Ubuntu wiping out the later(the already installed one)

    Thnx , Mav
  8. alina jack
    alina jack
    Hello I am a alina jack, I am from delhi. Currently I am working with Speedwell IT Solutions.
  9. Nigel Brown
    Nigel Brown delba
    Hi, I am a new member and our Udon Bolt v8 is due for arrival on Tuesday the 20th where I want to dive straight in and hopefully ge support from this forum, my first post is awaiting moderation?
  10. wjrowles
    wjrowles waltervl
    How do I vertically flip the video stream in Android 6.0.1 for the ov5640_mipi.c camera? I need to flip the video in the default boot mode.

    Kitkat 4.4.2 had the video in the correct non-flipped mode. The ov5640_mipi.c drivers appear to have identical video settings with regards to the video orientation/vertically flipping the video.

    UDOO Quad/Seco A62/OV5640 sensor

    Thx, John
  11. engr. mahnoor
    engr. mahnoor
    Dose any one have source file c_serial_example.c for UDOOX86ll Advance plus. I am unable to get it.
    1. waltervl likes this.
    2. waltervl
  12. engr. mahnoor
    engr. mahnoor
    kindly provide the source file c_serial_example.c for UDOOX86ll Advance plus. I am unable to get it.
  13. LDighera
    LDighera nophead
    E-mail me and I'll send you the V8 schematic and manual: LDighera@att.net
  14. sh123
    sh123
    mba colleges in ghaziabad with fee structure
  15. Fazlı Faruk Okumuş
    Fazlı Faruk Okumuş Antonio Gisondi
    Hi I am new to UDOO.Actually, I will buy one according to answers of this question. I just want to ask about gpıo's pins connected over the ATmega32u4.

    Can ı reach arduino pins over Linux kernel. What I mean that is can ı see the gpıochip's of the atmega if type kinda like ls /sys/class etc. or are there any change to communicate dynamically to arduino pins over serial connection of atmega (/dev/atcm.. )
  16. Fazlı Faruk Okumuş
    Fazlı Faruk Okumuş delba
    Hi I am new to UDOO.Actually, I will buy one according to answers of this question. I just want to ask about gpıo's pins connected over the ATmega32u4.

    Can ı reach arduino pins over Linux kernel. What I mean that is can ı see the gpıochip's of the atmega if type kinda like ls /sys/class etc. or are there any change to communicate dynamically to arduino pins over serial connection of atmega (/dev/atcm.. )
  17. Maximo
    Maximo
    Now testing UDOO Bolt V3 as the brains for DOBOTONE Game Console
  18. Hey Blud
    Hey Blud
    Still got some hair left. Didn't pull it all out. LOL
  19. MarkMMullin
  20. kkaran_2010
    kkaran_2010 waltervl