Troubleshooting

Problema com atualização de data e hora

invalid@example.com (mylenna) — Thu, 22 Aug 2024 17:23:51 +0000

Estou tendo um problema recorrente com a data e hora do windows que é utilizado na minha placa udoo. Mesmo com a bateria da BIOS carregada e também a BIOS atualizada, processador com pasta térmica e tudo ajustado a data e hora do sistema não atualiza, eu corrijo e quando desligo a placa e a ligo novamente ela não atualiza a data e hora e permanece com a correção que fiz. Alguém já passou por isso ou tem alguma ideia de como resolver?
Desde já agradeço!

Driver for Multimedia Controller on Win 10 machine

invalid@example.com (Graham Marshall) — Tue, 06 Dec 2022 18:00:54 +0000

In Windows Device Manager, it shows that the driver for the Multimedia Controller on my UDOO Bolt 8 is not found. Where can I find this driver? If I just ignore it, then the computer suffers a blue screen of death (BSOD) at apparent random times at least once a day. If I disable the Multimedia Controller the system appears stable . Is it safe just to disable it?

Silabs serial driver

invalid@example.com (hybotics) — Fri, 24 Sep 2021 17:45:55 +0000

Hi,

I have an UDOO Bolt V8 with 32Gb RAM and a 1Tb Seagate SSD. I recently got some TinyPico boards and am unable to get reliable data transfer to them over serial links. Many times, the transfer will just hang which forces me to unplug and replug the TinyPico to get the connection back. This problem is so bad that I have had to stop using my TinyPico boards and this is not working for me.

Is there a fix for this and how do I get it?

8-Dale

UDOO BOLT GEAR is not waking up after suspend the Ubuntu 20.04

invalid@example.com (bellerophon) — Wed, 22 Sep 2021 13:42:17 +0000

Dear Community,

I have installed a ubuntu 20.04 for my recent UDOO Bolt Gear purchase. It is working w/o any issue apart from it doesn't wake from suspend when I press keyboard buttons, clicking the mouse, re inserting the USB stick for keyboard and mouse. I have even played with re inserting HDMI cable, but no success.

Ubuntu official says, possible reason for this behaviour is hardware is not supporting this operation.
It is disappointing that UDOO BOLT GEAR does not support this...

UDOO BOLT GEAR is not waking up after suspend the Ubuntu 20.04

No Display on USB C or HDMI

invalid@example.com (hawamahal) — Mon, 13 Sep 2021 03:30:01 +0000

Hi, I am new here. Joined as I got my new Bolt V8. The problem i am having is blank screen. I connected everything, powered it up with the official power supply. The power light turns green, but I don't see any display.

Have tried the following without any luck

1. Used 3 different monitors i.e. 2 - 4K monitors and 1 Full HD monitor.
2. Connected 2 different working USB C cables and 3 different HDMI cables.
3. Run with 1 RAM stick in each of the slots. Got another working RAM from another...

No Display on USB C or HDMI

Power adapter broken?

invalid@example.com (Chuso) — Thu, 26 Aug 2021 17:49:13 +0000

Hi,

My Udoo Quad stopped working today looking like this when I try to boot it:

Is that the same issue described here and hence can be fixed by buying a new power adaptor? https://www.udoo.org/forum/threads/green-led-blinking-udoo-wont-boot-official-discussion.264/

I've been using this Udoo with this official power adaptor that came with the device for 7 years with no issues and it has been plugged to the same socket for three months. I guess...

Power adapter broken?

Network Proxy Settings

invalid@example.com (Ashwin M J) — Wed, 19 May 2021 06:28:53 +0000

How to connect to a network which has proxy settings?
I'm using UDOObuntu. I have tried adding few lines about the proxy settings in /etc/apt/apt.conf . I also tried creating a new file in /etc/apt/apt.conf.d & adding the proxy settings in that file. But nothing worked. I'm not able to access the Internet.

Bolt Arduino dropping off of USB

invalid@example.com (Andrew Chatham) — Sun, 03 Jan 2021 01:27:08 +0000

I've been using the Arduino on my Bolt and recently had it drop off of USB and not come back after a reboot. I followed the udoo instructions to disable the modem manager and shorted the reset pin, and the Arduino came back but then dropped off again as soon as I ran my sketch again (~3 seconds into...

Bolt Arduino dropping off of USB

kernel issue?

invalid@example.com (Giuseppe D'Alessandro) — Thu, 05 Nov 2020 09:16:53 +0000

Dear all,
My UDOO-quad was turned off a lot of time. I created a new bootable microSD with UDOObuntu LTS this morning and when I turned on the board, I read this via serial connection:

What's the problem?
Thank you in advance

U-Boot 2015.10-00061-g68849f9 (Jan 08 2016 - 17:01:43 +0100)

CPU: Freescale i.MX6Q rev1.2 at 792 MHz
Reset cause: POR
Board: UDOO Quad
DRAM: 1 GiB
MMC: FSL_SDHC: 0
*** Warning - bad CRC, using default environment

No panel detected:...

kernel issue?

Installing Nvidia GeForce 1060 3gb

invalid@example.com (Valholo) — Fri, 15 May 2020 20:15:53 +0000

Hello,
I followed the instructables link on how to install the GPU. However I can’t seem to get the Nvidia driver to recognize it, therefore I can’t install an Nvidia driver. YouTube hasn’t been helpful either. Please help.
Setup:
X86 ultra
M2. Key with b slot
250gb SATA drive
1060 3gb Nvidia GeForce gtx
Fan
400w power supply.

i am also wondering what kind of female three pin connector is used for the fan that is...

Installing Nvidia GeForce 1060 3gb

Cant'n login u-boot mode

invalid@example.com (dathuynh148) — Wed, 12 Jun 2019 15:18:01 +0000

Hello all, I'm new to embedded linux. I read tutorial compile U-boot on https://www.udoo.org/docs-neo/Advanced_Topics/Compile_U-Boot_Bootloader.html. I have some questions:

Compiling u-boot on linux compute. Then I run lsblk on my VMware computer, it show sda patrition with sda1 and sda2. The mount directories are /dev/$USER/roots and /dev/$USER/rootfs.
What is correct path to run 2 commands

sudo dd if=SPL of=/dev/*** bs=1K seek=1
sudo dd if=u-boot.img...

Cant'n login u-boot mode

Bios will not load

invalid@example.com (Stein) — Mon, 27 May 2019 14:23:49 +0000

I think my udoox86 cuad just died. It keep trying to start, bit give up and restart. It never gets to the bios it restarts before. The fan starts and a second later it restarts. Is there a solution to this?

Udoo x86 ultra fan issue

invalid@example.com (Marco Aurelio Filippetti) — Wed, 21 Mar 2018 09:14:13 +0000

I purchased the original fan for the x86 at the udoo shop. It arrived today and right upon installation i realized something strange: it turns on as soon as the connector is attached - even if the OS (win 10) is shut down. And it keeps on running at full power no matter what. I have tried adjusting the thermal settings in the BIOS, but nothing seems to change this behaviour. I had to disconnect the fan since I couldn't find a way to shut it down. Any thoughts??? Tks!!!

Board restarting when I confirm Firefox login on ubuntu.

invalid@example.com (Eartharoid) — Fri, 02 Mar 2018 12:56:35 +0000

I've just installed ubuntu on my udoo86 board and logged into Firefox with my microsoft outlook account. When I press the verify login button in outlook the screen goes black, and a few seconds later the board starts up again.
Why?

Strange disk errors (with Ubuntu)

invalid@example.com (Stefano Tognon) — Wed, 29 Nov 2017 14:19:33 +0000

hi,

I started to use the Udoo X64 board only from 2 months and it runs 24h/24h as a little BOINC server (20 clients attacched, but BOINC is running only from two weeks).

However after less of 7 weeks of usage I had Ubuntu thathas mount the filesystem as read only for disk errors (I use EXT4 filesystem on the eMMC intenal 32GB disk).
After a reboot I need to fix some orphan inodes by hand.
Yesterday I get the same errors, so now looking to log message, I get many messages like this:

Nov...

Strange disk errors (with Ubuntu)

Micro SD issues [Official disccusion]

invalid@example.com (andcmp) — Thu, 27 Jul 2017 05:00:07 +0000

Hi all!

This topic gathers users with UDOOs that won't boot because of bad flashed micro SD cards, typically corrupted memory cards or when the image file isn't properly flashed (e.g. was written in a partition).

If your UDOO won't boot, first follow our troubleshooting procedure: Why my UDOO won't boot? http://www.udoo.org/faq-items/why-my-udoo-wont-boot/ and then post the results here before asking for support so we can...

Micro SD issues [Official disccusion]

Reset BIOS on Udoo x86 to default setting

invalid@example.com (Jaroslav Urbánek) — Thu, 22 Jun 2017 15:24:45 +0000

Hello,
I have problem with HW reset bios to the default setting (factory reset). I set up xhci - USB on DISABLE yesterday and then does not work keyboard and all USB devices. I don´t know how to bios setting and change usb xhci on ENABLE without keyboard.

Thank you very much for your help

usb serial quits early on quad

invalid@example.com (sombunall) — Fri, 26 May 2017 20:38:14 +0000

I am following all instructions in the manual for usb serial from linux PC to Udoo. I am using udoobuntu 2.0 minimal edition.

It seems to work when it boots but it quits before I can login. Using minicom I get:

(SNIPPED)

Code:

[    3.130526] init: mounted-proc main process (119) terminated with status 1
[   10.927096] NET: Registered protocol family 10
[   12.554004] ov5640_read_reg:write reg error:reg=300a
[   12.603421] ERROR: v4l2 capture: slave not found!
[   12.612184] ERROR: v4l2...

usb serial quits early on quad

UDOO Camera Module

invalid@example.com (george) — Fri, 10 Feb 2017 23:07:30 +0000

Hi there,

I recently picked up an UDOO Dual and a Camera Module. I've been following the video and instructions here:

http://www.udoo.org/docs/Hardware_&_Accessories/UDOO_Camera_Module.html

but the output that I'm getting is such:

udooer@udoo:~$ gst-launch-1.0 imxv4l2videosrc num-buffers=1 ! jpegenc ! filesink location=out.jpg
Setting pipeline to PAUSED ...
ERROR: Pipeline doesn't want to pause.
Setting pipeline to NULL ...
Freeing pipeline ...

udooer@udoo:~$ dmesg |grep -i...

UDOO Camera Module

LVDS 7" set up problem

invalid@example.com (Lorenzo.MdpTech) — Fri, 04 Nov 2016 07:59:21 +0000

Hello,
i've just bought some LVDS 7" for Quad (which is my board), i've followed the istructions for setting them up, but nothing shows up on the screen.
So, first of all I've established the connection between my pc and the board with putty (Windows), then I physically connect the LVDS, I insert the micro sd with android flashed inside (everything works if i try with the HDMI so i think it isn't an android problem), I plug the current (original UDOO power supply) and finally I stop the...

LVDS 7" set up problem