Recent Content by peter247

  1. peter247
    Post

    USB instead micro SD

    I would say that you can put the RFS on a usb stick , but the uboot HAS to be still on the sd card , so you can`t do away with the sd card.
    Post by: peter247, Sep 15, 2014 in forum: General Discussion
  2. peter247
    Post

    i2c scanner not working

    glad to know , and will have to try it and see if it works for me.
    Post by: peter247, Sep 10, 2014 in forum: Arduino IDE
  3. peter247
    Post

    Booting from SATA setup.

    The way I do it is leave the kernel still on the sd card and just install the RFS on the sata drive . That way it`s easier to upgrade or change...
    Post by: peter247, Sep 10, 2014 in forum: Troubleshooting
  4. peter247
    Post

    sata III and udoo?

    I have a crucial mx100 - 512 GB and a Agility 3 oct - 128 GB , which are both 6 gb/s sata drives. They both work on the udoo , but the mx100 has...
    Post by: peter247, Aug 30, 2014 in forum: General Discussion
  5. peter247
    Post

    safe i.Mx6 GPIO out -> REQ. arduino all pins INPUT???

    If you cut the power the Sam side should go back to default . I`m 99.9% sure this is what happens !!!! 1/ You power cycle !!!! .... REMOVE THE...
    Post by: peter247, Aug 24, 2014 in forum: General Discussion
  6. peter247
    Post

    Using iMx6 and pinMuxing

    I think you may be confused about Pin Muxing . Pin Muxing is a way to turn a gpio pin into a special function like , serial , i2c , spi . Which I...
    Post by: peter247, Aug 14, 2014 in forum: UDOO 101
  7. peter247
    Post

    Basic Python in / output

    Have a search for :- "firmata android" and there are some programs which controls a arduino using firmata for android , but to do honest I have no...
    Post by: peter247, Aug 12, 2014 in forum: Android
  8. peter247
    Post

    GPIO Warnings - Pinout Reset

    If you only use one of the side , sam or imx6 you don`t need to be concerned . What they are saying is don`t set both sides to output !!!!. I`ve...
    Post by: peter247, Aug 8, 2014 in forum: UDOO 101
  9. peter247
    Post

    U-Boot 2013 Boot from SATA

    You say to copied the mmc to sda2 , so you have set satapart=2 .. ?
    Post by: peter247, Aug 8, 2014 in forum: General Discussion
  10. peter247
    Post

    Recognizing a SATA drive on my quad

    I have a 80 gb SSD and that boots like a dream with only uboot on the sd card , But I`ve found that my 512 gb drive will not boot with only the...
    Post by: peter247, Jul 31, 2014 in forum: UDOO 101
  11. peter247
    Post

    how to create quadcopter with Udoo

    I build and fly quadricopter / hexacopters and the udoo would not be my first choice . Why because of the first rule , keep the weight and power...
    Post by: peter247, Jul 26, 2014 in forum: General Discussion
  12. peter247
    Post

    C++ Compiler for UDOO

    Which side the sam / arduino or imx6.?
    Post by: peter247, Jul 23, 2014 in forum: General Discussion
  13. peter247
    Post

    Problem with DNS server settings on Udoobunto

    People can just get confused about how to set up a working network , because it can become quite a complex subject , and we really don`t have the...
    Post by: peter247, Jul 22, 2014 in forum: Linux Ubuntu
  14. peter247
    Post

    Problem with DNS server settings on Udoobunto

    Didn`t know about the 8.8.8.8 google nameserver server , so I guess that`s something new for me , I use the opendns nameservers at :-...
    Post by: peter247, Jul 22, 2014 in forum: Linux Ubuntu
  15. peter247
    Post

    Problem with DNS server settings on Udoobunto

    Yes , I took and passed the ccna too ( 2010 ) , plus the network + , msca etc etc etc. ( What can I say I was bored , now sick of all things...
    Post by: peter247, Jul 21, 2014 in forum: Linux Ubuntu