What's the changes for 1.04 bios?
my wireless kb will not connect fast enough with the default timer for the splash screen for bios setting. the fix is either use wired kb or...
I have the black screen issue with mine w10 fix so far for me put the unit to sleep and pull it back out. Must be driver issue like you said.
That high of a temp can fry the cpu.that's why I run mine 100% speed. Max ever is 57c
I also change the time out seconds to like 5-9, so my wireless keyboard has the chance to connect and hit esc.
There is a long answer to that problem with the usb uart and the board needing to be reset.
The other solution is this...
Ive purchased a global key from a third party website, and was able to install both my UDOO x86 and a tablet with win 10 Pro. Both fully activated...
The only issues i have with is the power button is not accessible, as well the access to the pin headers for the switch. But over all a good...
The x86 have a heatsink included and if using in a car do get the fan and run it 100% fan speed.
Type what command you are using here.
I believe the Ethernet adapter uses the ssd slot. So you can use the WiFi and Ethernet adapter at the same time.
So what I've found in 1.03 is that power failure option is broken again since before 1.02.Also noted in the power up from Currie it listed in the...
for the fan speed, I would make it a variable instead of a fix value.
It not going to hurt it but it's your device.
I got no issue just sitting there.
Also added note some bios setting rely on the RTC as well.
It's not going to hurt the battery just sitting like that, unless you throw the udoo...
Thats the EFI Shell, type exit and select the boot device on the next screen.
None Taken, I'll agree on you about trusting a random file on the internet :)
Here is a pic of the changed bios
Too bad the heatsink is not turn 90 degrees to maximize the air flow, in your case.
Did you press the reset button when the message pops up?
Separate names with a comma.