This feature will be available in the next BIOS version.
It is indeed a really needed one for embedded projects.
waltervl is right,
There is no driver support for UDOO BOLT and no ETA has been defined yet.
We gave priority on HW development and shipping, and...
CEC functionality should be already enabled in the builds in this page:...
This is not an issue, it is normal.
After dd-ing the disk, the kernel doesn't reload the partition table automatically.
You can do that...
Hi @pavan ,
I've replied in the other topic:
Please add [SOLVED] to the...
You wrongly flashed the uboot directly on the filesystem instead of the whole disk:
sudo dd if=SPL of=/dev/sdb seek=1...
I'd suggest using the standard ioctl subsystem for Linux, and submit the low level calls directly to the i2c device:...
Have you tried with the precompiled official images in the Download section?
Also, send the model of...
The switch is located on the bottom face, right side.
Please refer to this guide on how reset the BIOS with the switch:...
Which audio card are you developing for?
Can you provide the driver you're writing?
@jas-mx Do you have any suggestions?
Yes, BTW the only improvement shipped with 1.05 is the SPDIF feature enabled.
Probably FreeDos is not compatible with the updater at the moment.
If you can, please use an Ubuntu distribution (e.g. Ubuntu 18.04)...
Hi there @remotejon and welcome to the UDOO Forum,
Unfortunately, UDOO X86 main CPU doesn't have an SPI interface, so is not possible to do that...
Grazie per averci contattato,
Ti abbiamo risposto nel ticket che hai aperto.
CentOS 6 is really painful to install in Braswell boards due to the elderly kernel shipped with the distro, and unfortunately...
Hi there @shifting_tech,
Like discussed in #1 you should use the latest kernel version (at least 4.14), where CEC_CAP_DEFAULTS is defined.
Applying more than 12V±5% to the board can severely damage the board. If you did it, maybe some component under the USB port could be broken due...
@freethinker, like explained in the docs, it is possible that the keyboard you have doesn't work in POST stage:
However, if you end up in the...
@Paulo Matos Please remember to update the topic title with [SOLVED] ;)
I've tried myself the installing procedure with the Ubuntu 16.10 Slim and it initially it fails (GRUB installation crashes), so seems a...
Separate names with a comma.