i will try resolve all the issues:
UDOO 1 :
Often the problem can be resolved by remaking the SD with linux.
what is the problem?...
the pin of the arduino due should match, because the pins are the same.
Can you take other photos and tell what is the shield ?
Have you tried with another app if the issue is the same ?
Can you explain better ?
What kind of issue have you got? Have you test, with the serial, if the udoobuntu starts?
are you using android or udoobuntu?
Hi, sorry i'm late!
I tolked with udoo team! and there is a solution!
In the new udoo realise, there is a udoo configuration tool, starts it,...
you can do an android service that communicates with the arduino sketch, so the button can do the command.
if you explain better the idea, i...
I have the same problem, i'm trying to find a solution. Gstream is a solution, but it has some problems with arm.
Hi, I did not understand well what is the problem, if you can explain better the problem I can help you better.
However, if i have understood, if...
Hi, you can try to redo the sd with ubuntu, if the issue persist it could be a hw problem.
I don't think that exist a adapter and the flat cable of UDOO is smaller than pi flat cable. If anyone finds the adapter or if don't exist a...
If you use a serial monitor of the arduino ide, for a simple test, you can see the output of the code.
I can't try it because now i don't have udoo, but if in the ide you can change the port and the device i think that it works!
If you have an...
The code that you have posted should be correct, but i can't test it because now i don't have udoo, i will test it.
When you can, you test my code...
UDOO don't have a led on the board, so the sketch don't do nothing because there isn't a led.
If you want to use a blink, you connect a led...
Have you installed the driver ?
You can find it here http://www.silabs.com/products/mcu/page ... ivers.aspx
I have try to install qt creator now and it works.
If you use first apt-get install qtcreator, it installs qt4-dev-tools.
It may be that...
I have Mavericks and it works, have you installed the driver correctly?
Re: Udoo and Monitor --> OUT of Range 67.5kHz/60Hz
Have you solved the issue with the monitor ?
Separate names with a comma.