You'll need to install the audio driver for Ryzen APU's GPU-subcomponent.
re: need unplug then replug
Please note there are so many "proprietary" cordless mouse designs that use various method to "bind" the mouse with...
It's been awhile. I vaguely remember installing W10 1809 64bit is not a problem.
Drivers might have been fetched from the Internet during the...
Installing Win7 will be a challenge for any recent CPUs, be it Intel's or AMD's.
Any issue on that, check Microsoft's statement.
(I am not...
Fan control feature in the current firmware is not tuned correctly. Will have to wait for the next release(s).
The first two M.2 memory module is for M.2 SATA SSD.
On UDOO Bolt, only the key-B slot (2260 form factor) supports SATA SSD.
The Key-M slot is...
Very hard to tell.
Try to switch the HDMI cable or HDMI monitor to see if it helps.
Also, you can find USB-C to HDMI adapter dongle fairly cheap....
Consumer IR (CIR) receiver signal is sent to Embedded Controller MEC1705H.
The EC is then in turn connected to x86 processor.
CIR support, just...
Okay, it looks that a non-OEM type of power supply 19V 3.42A (DC cable seems to be very long and not so thick, it has a thermal shutdown function,...
re: power supply is plugged into the jack. 19V 3.5A
Showing exactly make/model would be helpful.
Some extremely cheap one may have one or more...
USB-C based power supply needs to be able to offer:
PD 2.0 20V 3A profile (id: 0x5161).
It is just the extra effort needs to be performed:
1. Ryzen Embedded CPU/GPU is too new and only the latest Linux versions support it. If want a...
4x version looks like this:
(Based on V8, V3 may be similar or same)
The Amber/Green LED near one corner of the BOLT is the power-state LED.
No light == no power is...
Thanks for the picture.
Just a suggestion...
Key-M slot's PCIe adapter, per your picture is the 2-lane version of the extender board. There is a...
One DIMM is just fine (I use the one closest to the fan.)
A side question, did you press the power button?
Extreme-hack the serial driver (find-n-replace the value in baud rate table, from the binary, of course.)
Alternative is to write an Assembly...
These settings won't be applicable in the case that UART came from Intel Celeron N processor (from its PCH section.)
See page 123:...
... half of the PCB thickness plus the SODIMM socket added height is about 7mm. < -- probably less than that
So total is 37mm.
Separate names with a comma.