how to get the os into the udoo quad

Discussion in 'UDOO QUAD' started by malaga, Mar 17, 2021.

  1. malaga

    malaga UDOOer

    Joined:
    Jun 19, 2018
    Messages:
    20
    Likes Received:
    0
    hi there - good day,

    i have an udoo quad rev 4 and i guess that the specs can be found here

    https://www.udoo.org/docs/Software_&_OS_Distro/UDOObuntu.html
    the question is: how to get the os onto the board!?

    note: with raspi and banana pi i have slots for the sd-card but how to apply the os on the udoo quad!?
     
  2. sirrab

    sirrab UDOOer

    Joined:
    Jul 26, 2014
    Messages:
    261
    Likes Received:
    32
    You put the OS on a micro SD card.


     
    malaga likes this.
  3. malaga

    malaga UDOOer

    Joined:
    Jun 19, 2018
    Messages:
    20
    Likes Received:
    0
    hi there - good day dear sirrab.

    https://elinux.org/images/b/be/UDOO-icons2.png
    shows allmost the board i have - but wait: i do not have a micro-sd-slot

    so i guess that i have to use the usb-port - and i guess that i have to use a bootable linux on this port - offered on a USB-Stick

    am i right!?

    look forward to hear from you again

    greetings
     
  4. malaga

    malaga UDOOer

    Joined:
    Jun 19, 2018
    Messages:
    20
    Likes Received:
    0
  5. sirrab

    sirrab UDOOer

    Joined:
    Jul 26, 2014
    Messages:
    261
    Likes Received:
    32
  6. sirrab

    sirrab UDOOer

    Joined:
    Jul 26, 2014
    Messages:
    261
    Likes Received:
    32
    Micro SD slot is under the heatsink.
     

Share This Page