Hi, We recently ordered one and then 4 udoo quad with 7'' LCD panels. The udoo boards are just working well and perfect for our project but we have many issues with the LCD 7'' panels ! Touch issues On the 5 panels we ordered only one is behaving correctly ! The other five have "dead" touch zones. The first one we ordered has an horizontal strip of about 100 pixels which is completely unresponsive. The other 3 which do not work as expected have a vertical strip of about 60 pixels on the left border which is also not responsive. I did the check with Ubuntu and Android reference images and a self-compiled test program. The result is always the same, some regions of the screen do not detect the touch. I recompiled the driver with debug output in the interrupt service routine of the touch controller and noticed that no interrupt is generated for the the touch events in the aforementioned zone. This is then typically an hardware problem since the same software works well and detects all touch events with one of the five screens. Do other udooers have similar issues ? Is it a manufacturing problem or just me being unlucky ? Heating issues Some other members reported that their screens were abnormally heating. I experience the same and would appreciate any hint on how to fix this. See this post and following ones.