[SOLVED] Issue with UDOO Quad under Android 6.0.1 after changing config for 15" touch display.

Discussion in 'UDOO QUAD' started by Stephane Berginz, Nov 22, 2016.

Thread Status:
Not open for further replies.
  1. Stephane Berginz

    Stephane Berginz New Member

    Joined:
    Nov 12, 2015
    Messages:
    5
    Likes Received:
    3
    Hi, I was looking at this
    http://www.udoo.org/forum/threads/u...binder-173-173-transaction-failed-29189.5154/
    ...and thought it maybe similar, but someone suggested me to create a new discussion for this as it's an official UDOO display.

    My issue:

    I bought UDOO 15" touch display and use it without any problem under android 4 with below config => setenv bootargs console=ttymxc1,115200 init=/init video=mxcfb0:dev=ldb,1366x768M@60,if=RGB24,bpp=32 video=mxcfb1:eek:ff video=mxcfb2:eek:ff fbmem=28M vmalloc=400M androidboot.console=ttymxc1 androidboot.hardware=freescale mem=1024M

    After I create an android 6.0.1 using instruction on UDOO site, I did same seetings as above.

    After setenv save and boot command UDOO restart but I get always
    binder: xxx:xxx transaction failed 29189, size 0-0 error

    Can anyone tell me if I need to use different config for 15" touch display under UDOO android 6 ?

    Thanks in advance.
     
  2. waltervl

    waltervl UDOOer

    Joined:
    Dec 12, 2015
    Messages:
    2,302
    Likes Received:
    575
    Andrea Rovai likes this.
  3. Stephane Berginz

    Stephane Berginz New Member

    Joined:
    Nov 12, 2015
    Messages:
    5
    Likes Received:
    3
    >>Did you try the following instruction when using an HDMI monitor first?
    Now I tried and that was it. As easy as that :)
    Thanks a lot for your fast reactivity. Long live to UDOO !
     
    waltervl and Andrea Rovai like this.
Thread Status:
Not open for further replies.

Share This Page