udoo as all-in-one reprap 3d-print server

Discussion in 'Debian' started by udoo-reprap, Feb 12, 2014.

  1. udoo-reprap

    udoo-reprap New Member

    Joined:
    Feb 4, 2014
    Messages:
    8
    Likes Received:
    0
    Hi,
    we have develloped an Arduino Due Shield to support a reprap 3d - Printer.
    We named it RADDS v1.1 http://www.dr-henschke.de/RADDS_due.html
    For this udoo quad ist perfect for us. So we Try to realize a special debian armhf Derivat for Reprap:
    Webmin
    OpenMediaVault (+ miniDLNA -> postfix for E-Mail deliver)
    Cura (CuraEngine)
    Octoprint
    X-Server
    Synaptic
    Cromium
    Arduino-IDE
    Repetierhost
    Repetier-Frmware 9.1
    asterisk/elastix -> for SMS und Fax -deliver (elastix-arm-2013-10-25.tar)
    maybe also Printrun


    If i have finish it to test, I would post the Img here.
    Have fun
    Angelo
     

    Attached Files:

  2. udoo-reprap

    udoo-reprap New Member

    Joined:
    Feb 4, 2014
    Messages:
    8
    Likes Received:
    0
    Shi*, yesterday my udoo quad is broken :-(.
    I ordered a new one. I hope they can delivered it quickly.
    So I hope to finished the Configurtion.
     
  3. udoo-reprap

    udoo-reprap New Member

    Joined:
    Feb 4, 2014
    Messages:
    8
    Likes Received:
    0
  4. delba

    delba Administrator

    Joined:
    May 8, 2013
    Messages:
    1,063
    Likes Received:
    9
    Nice, glad you were able to continue your project. Give us some more info about it.
     
  5. Renha

    Renha New Member

    Joined:
    Mar 23, 2016
    Messages:
    1
    Likes Received:
    0
    Hi. It looks like latest RADDS (1.5) version could not give to UDOO QUAD sufficient power, and forces it to reboot every ~6 seconds. What to do?
     
  6. waltervl

    waltervl Well-Known Member

    Joined:
    Dec 12, 2015
    Messages:
    1,885
    Likes Received:
    462
    Perhaps a dumb answer but I would power the quad separately from the shield.
     
  7. allwet

    allwet New Member

    Joined:
    Oct 30, 2013
    Messages:
    29
    Likes Received:
    1
     
  8. allwet

    allwet New Member

    Joined:
    Oct 30, 2013
    Messages:
    29
    Likes Received:
    1
    Any further progress on getting the 3D printer control working on the UDOO Quad with Repetier? I'm interested in trying something similar. I want to control CNC projects using an Arduino GRBL Controller (v3.51) plugged into the UDOO's SAM3X side. I need a means of feeding g-code to it. Repetier looks do-able, if it can run on the UDOO. I'm using udoobuntu v2.2.latest released, freshly installed. It would be neat to control a CNC device all from one box. I have successfully implemented VNC server on the linux platform so I can connect from any of my Linux boxes using the tight vnc client viewer (xvnc4viewer).
     
  9. waltervl

    waltervl Well-Known Member

    Joined:
    Dec 12, 2015
    Messages:
    1,885
    Likes Received:
    462
  10. Greg Nuspel

    Greg Nuspel New Member

    Joined:
    Oct 10, 2013
    Messages:
    4
    Likes Received:
    0
    Very interested in this project. I have a CR-10s I plan to convert to this controller.
     

Share This Page