XenServer on UDOO, is it possible?

Discussion in 'UDOO X86' started by Alessio Garzi, Apr 16, 2017.

Tags:
  1. Alessio Garzi

    Alessio Garzi New Member

    Joined:
    Apr 15, 2017
    Messages:
    3
    Likes Received:
    0
    Probably UDOO is not intended to run as a bare-metal hypervisor, however I tried to install xenserver 7.1, the installation process breaks because the m2 ssd is not recognized.
    Has anyone successfully installed xenserver on udoo?
    Maybe attaching a sata drive I would have some mass storage recognized?
     
    Alessio Garzi, Apr 16, 2017
    #1
  2. Alessio Garzi

    Alessio Garzi New Member

    Joined:
    Apr 15, 2017
    Messages:
    3
    Likes Received:
    0
    I tried the previous version, xenserver 6.5 and the ssd is not recognized, very strange.
     
    Alessio Garzi, Apr 19, 2017
    #2
  3. jas-mx

    jas-mx Active Member

    Joined:
    Dec 31, 2013
    Messages:
    407
    Likes Received:
    118
    Based on the HCL cpu list I wouldn't expect this to work the UDOO x86 are not considered server class hardware, however I guess as long the NIC and disk controller are recognize there may be a possibility of it working.
     
    jas-mx, Apr 20, 2017
    #3
  4. Alessio Garzi

    Alessio Garzi New Member

    Joined:
    Apr 15, 2017
    Messages:
    3
    Likes Received:
    0
    You wont believe it but the 6.5 version for now it's working quite well, I created a couple of vm and nothing crashed after 2 days
     
    Alessio Garzi, Apr 20, 2017
    #4
  5. jas-mx

    jas-mx Active Member

    Joined:
    Dec 31, 2013
    Messages:
    407
    Likes Received:
    118
    That's good to hear.
     
    jas-mx, Apr 20, 2017
    #5

Share This Page