Accessories

UDOO BOLT I/O Expansion Board - anyone seen it?

invalid@example.com (Kevin Sears) — Tue, 08 Oct 2019 20:40:09 +0000

In the UDOO Bolt user manual, it refers to an I/O expansion board. I have been looking in the UDOO shop and @Mouser and RS in the UK but cannot find it for sale.
Can anyone point me to where i can by it?

How to rotate HDMI?

invalid@example.com (mushketer888) — Sun, 23 Jun 2019 06:42:46 +0000

Hello all...
I have question how to rotate HDMI?
i have lcd panel over hdmi
and i need to rotate it upside down

i will say that xrandr cant do anything!
i tried to edit xorg.conf Device section, for example:

Code:

Section "Device"
        Identifier      "i.MX Accelerated Framebuffer Device"
        Driver "vivante"
        Option          "fbdev"         "/dev/fb0"
        Option          "vivante_fbdev" "/dev/fb0"
        Option          "HWcursor"      "false"
        Option...

How to rotate HDMI?

kit LCD 15.6'' udoo

invalid@example.com (kloesa) — Thu, 16 May 2019 08:20:29 +0000

Hello,

I can't find anymore the kit LCD 15.6'' Touch from udoo shop.
Anybody knows the reason?
is it due to an obsolescence of the screen? of the touch screen? of the controller? or the whole kit?
If yes, where could we find an equivalence?

By advance, thanks for your answers

Connector Types

invalid@example.com (ralphie79) — Wed, 08 May 2019 16:13:22 +0000

If anyone is looking for the connectors to use, I've put together a list of them from digikey. I hope they're all correct. If anyone from UDOO would like to confirm these, that would be great. Also, just an idea... Maybe putting together a small pack of connectors to buy off your website from your suppliers??? I thought I had the right ones amongst the bits and pieces here at home, but all the wrong sizes.

You can pick up some of the jst cables from places like sparkfun.com as well.

J1...

Connector Types

Wireless or not graphic drawing tablet?

invalid@example.com (huangsha) — Wed, 10 Oct 2018 10:06:56 +0000

Hi guys

If this topic is covered elsewhere I apologize. Been doing a lot of researching on tablets for use with my photography and I think I'm going for the XP-Pen DECO 03. I see it comes with wireless connectivity and I'm wondering how effective it is as it's a feature you obviously pay for and if it's not that reliable then maybe the cheaper xppen OSU Star G640S models more useful?.I'd like to make full use of it's features with Photoshop .

Oh, and here the tablet itself:...

Wireless or not graphic drawing tablet?

Bluetooth Keyboards do not connect (either HID or SPP)

invalid@example.com (frudman) — Wed, 05 Sep 2018 16:44:06 +0000

I have tried with different bluetooth adapter (including the cirago bta7300 adapter) and different keyboards (including the made-for-android toshiba wireless android-optimized, model pa3959u-1etb) and nothing works.

All keyboards pair with all adapters but none work as hardware keyboards (e.g. for browser input). It's as if they're not connected (even when they're paired).

To test for problems, I downloaded and installed the BlueInput.apk from...

Bluetooth Keyboards do not connect (either HID or SPP)

Kit M.2 Wifi/BT aerial orientation

invalid@example.com (Chris Morris) — Wed, 25 Jul 2018 06:12:42 +0000

The kit comes supplied with two aerial leads, both are 110mm long with a small PCB at one end.

Is there a recommended orientation for mounting the aerials?

Driver for UART in Windows 10

invalid@example.com (Jimmy Maguiña) — Sun, 15 Jul 2018 03:37:34 +0000

Hello

Install windows 10 on my Udoo Advanced Plus and verify the device manager the board does not recognize the 2 UART ports with which it comes integrated, my query is if you need a driver to recognize these ports.

Greetings and thanks for your help.

Jimmy

Change FPS param of camera

invalid@example.com (dunfrey) — Sun, 27 May 2018 00:58:43 +0000

How can I change the camera's FPS: example-> change from 30 to 120 fps?
Then I need to read the frames in the ROS, using: rosrun usb_cam usb_cam_node

capture card 2 source

invalid@example.com (mpeople) — Sun, 25 Feb 2018 09:41:09 +0000

looking my udoo x86 ultra a capture card with 2 source in SDI for 2 different SDI Cameras ....

no USB solution

THXXX soooo mutch

HD-SDI SDI 3g output

invalid@example.com (mpeople) — Sun, 25 Feb 2018 09:37:47 +0000

hello
looking for a build in solution graphic card out HD-SDI 3g
build in

no converter solution like the blackmagic HDMI to SDI

thx sooo mutch for ur help

M.2 Dual network modules

invalid@example.com (nadrimajstor) — Tue, 20 Jun 2017 20:24:46 +0000

UDOO x86 manual (accessories section) have a subsection 5.1.1 M.2 Dual network modules however I fail to find this accessory in the shop.

7" touch LVDS inverted, fullscreen chromium not refreshing?

invalid@example.com (rswamy) — Thu, 23 Mar 2017 00:13:40 +0000

Hi,

I am setting up a UDOO LVDS 7" touchscreen that is rotated 180 degrees, because I am mounting the screen upside down in my application.

Here's what I've done:

xrandr -q (to get display name, which is "DISP3 BG" in this case)
xrandr --output DISP3\ BG --rotate inverted (to invert the screen)
xinput_calibrator (to rotate the touch inputs)

So far, that took care of most if it. The screen is upside down and the touchscreen works as expected, even in chromium.

My...

7" touch LVDS inverted, fullscreen chromium not refreshing?

10" universal LCD chalk-elec.

invalid@example.com (m4the0) — Wed, 01 Mar 2017 16:21:28 +0000

Hello
I found this thread http://www.udoo.org/forum/threads/non-udoo-touch-screens-and-drivers-for-android.1280/.
As i understood the 7" display work with android without drivers,but only single touch ?
I wonder if there is the same situation with 10" screen https://www.chalk-elec.com/?page_id...itive-multi-touch/p/42545413/category=3094861 ??

LCD 15,6" Touch for QUAD/DUAL and Android

invalid@example.com (m4the0) — Thu, 23 Feb 2017 18:14:20 +0000

I wonder if 15'6 touch screen worked correctly with my UDOO Dual with ANDROID OS, i just need to plug it in, or there is need to make some changes in driver, settings (im tottaly newbie) ?
I meant this screen http://shop.udoo.org/eu/accessories/video-kit-15-6-lvds-for-quaddual.html

Accessories compatibility

invalid@example.com (andrevh) — Sat, 24 Dec 2016 13:59:55 +0000

Are all udoo accessories compatible with each other, meaning neo and quads with x86?

Sent from my iPhone using Tapatalk

Android adk

invalid@example.com (iDo) — Thu, 24 Nov 2016 16:19:41 +0000

Hello,

I purchased Udoo neo, Udoo quad, LVDS displays, etc. and booted Android Marshmallow on it.
I've been trying to use Android adk on it to talk to Arduino, but the call to open accessory fails.

More specifically, mUsbManager.getAccessoryList() returns null.

I've tried plugging in J16 jumper and then unplugging it to reset Arduino, but didn't make a difference.
The Arduino sketch that I had uploaded is the one from "Android Arduino Hello World" UDOO tutorial.
In Android UI, I've...

Android adk

Use LCD 7" Touch for NEO with a UDOO Quad

invalid@example.com (Lorenzo.MdpTech) — Fri, 28 Oct 2016 10:12:29 +0000

Hello to everybody,
I have just realised that the displays i've bought are for the UDOO NEO and not for the Quad,
Is there a way to use them with my UDOO?
Maybe if i change the cable?
Thank you for answering.

LVDS screens [Official Discussion]

invalid@example.com (andcmp) — Mon, 10 Oct 2016 14:55:27 +0000

Hi all!

Finally we have some info to share about LVDS screens for UDOO.

Through LVDS interface, UDOO supports the following res:

- 640x480
- 800x480
- 800x660
- 1024x768
- 1366x768

18 o 24 bit x colors

as UDOO team we are going to distribute and support the following models:

- U.R.T. UMSH-8596MD-T which is a 7" without touch panel
- U.R.T. UMSH-8596MD-20T which is a 7" with capacitive touch panel (dual touch)
- Inteltronic LMTY101TE011V1 which is a 10.1" and will come with capacitive...

LVDS screens [Official Discussion]

Connecting Udoo to lapdock

invalid@example.com (figleaf) — Fri, 05 Aug 2016 20:19:43 +0000

Could someone please write a howto on connecting udoo to a lapdock? Could you please describe the cables and adapters? Are they the same as for a pi model B rev 2? The order to connect? Do all four lapdock models work? Does the trackpad and keyboard work?

I have a brand new Atrix lapdock and a brand new raspberry pi Model B rev 2. Trackpad and keyboard do not work. I don't know whether its the cable, adapter, lapdock or pi. I am using an:

(1) micro female to micro male USB cable; and a...

Connecting Udoo to lapdock