[MEDIA] After a couple of weeks of effort I finally got NCS working on a UDOO Neo, more info on my blog post if of interest.
Although the NEO comes fully equipped with a decent accelerometer/magnetometer and gyroscope there haven't been may examples demonstrating their...
[MEDIA] This has taken large number of man hours to debug and get working, it demonstrates how the M4 can be interfaced to WeMos SD card shield....
[MEDIA] Tiny NEO Scope is a very simple low bandwidth (less than 100Khz) oscilloscope developed to test the performance of the ADC (analogue to...
[MEDIA] This has taken a considerable amount of time to get working (over 100 hours of debugging) as verifying the SPI signals were correct has...
[MEDIA] Here we demonstrate how the cortex M4 can be used to implement the Dallas one wire protocol to read two DS18B20 temperature sensors. The...
Update: Finally have Touch and TFT updates working. In video M4 is initialising and controlling the display and a simple UI is presented allowing...
I'd recommend getting some M3 20mm (26 mm total) or 15mm pcb spacers to keep your board level and to leave enough clearance for the M2 cards on...
Another entry on the blog which demonstrates how the M4 could be used as a Pulse Oximeter. The M4 is also updating the SSD1306 display....
I although I don't use the arduino feature myself, I was approached to look into an issue on behalf a frustrated client who couldn't figure out...
[IMG] For those of you frustrated with lack of progress on RTC support, here's a blog post detailing how you can add a DS3231 (used by RPI) to...
Continuing with the automotive theme a novel use case for the i.mx6sx is a vehicle diagnostic adapter. [MEDIA] Here we demonstrate how the NEO...
Combing the M4 with the on board CAN interfaces opens up a number of possibilies of using the NEO for automotive solutions. I'm going to...
Here are instructions those of you wanting to enable and verify flexcan support: 1. Firstly one or both of the flexcan interfaces needs to be...
I know there are a number threads questioning and requesting camera support. The i.mx6sx has very basic video processing capabilities one of which...
Short description and video of Wayland/Weston running on the UDOO.
I started work on getting the FSL 3.10.17 (beta) kernel working on the UDOO a couple of weeks back and finally have a working/useable kernel....
Having just completed (today) a Debian Jessie rootfs with GPU/VPU support. I'm pleased to say it runs on my newly arrived UDOO Quad. It's not...
Separate names with a comma.