The IoT Maker Board

UDOO NEO is whatever you need to approach the world of makers. Launched in 2015 and funded by thousands of enthusiasts worldwide through Kickstarter, UDOO NEO is an Arduino-powered Android / Linux single board computer enriched with 9-axis motion sensors, BT 4.0 and a Wi-Fi module.
 
 

Get Started

In this guide you’ll learn how to setup your board

Documentation

Need some information? Check our DOCS

Resources

Get everything you need for your UDOO Board

Projects

Unleash the versatility of UDOO boards

FULL

EXTENDED

BASIC

DISCONTINUED

NXP® i.MX 6SoloX applications processor with an embedded ARM Cortex-A9 core and a Cortex-M4 Core
Integrated 2d/3d graphics controller
1GB RAM
1GB RAM
512MB RAM
WI-FI
BT 4.0 LOW ENERGY
FAST ETHERNET
WI-FI
BT 4.0 LOW ENERGY
FAST ETHERNET
9-AXIS MOTION SENSORS
9-AXIS MOTION SENSORS
MicroSD card slot onboard
8-bit SDIO interface*
1x USB 2.0 Type A ports
1x USB OTG (micro-AB connector)
Micro HDMI interface - LVDS interface + touch (I2C signals)
Analog camera connection supporting NTSC and PAL
8-bit parallel camera interface*
HDMI audio transmitter
S/PIDF & I2S*
8x PWM signals*
3x I2C interface*
1x SPI interface*
6x multiplexable signals*
Arduino-Compatible through the standard Arduino Pins layout and compatible with Arduino shields.
Digital I/O Pins
32 extended GPIOs (A9 dedicated)
22 arduino GPIOs (M4 dedicated)

Analog I/O Pins
6 available Pins
Ubuntu

Android
1x DC Micro USB 5V
1x DC Power Jack 6-15V
1x RTC Battery Connector
89mm x59mm (3.50″ x 2.32″)

Want to know more?

Download the DATASHEET
parallax background

UDOO NEO Projects



Unleash the versatility of UDOO boards.