[8 Mar][6dq/6sx] AOSPMod MM-R.07

Discussion in 'Android' started by secuflag, Jul 30, 2016.

Tags:
  1. Andrea Rovai

    Andrea Rovai Well-Known Member

    Joined:
    Oct 27, 2014
    Messages:
    1,703
    Likes Received:
    240
    Hi @herionoindo,
    strange: audio should also work "onboard". After you've set the output to "onboard" beware to reboot the board as said here, and if the problem persists update this thread please.
     
  2. Andrea Rovai

    Andrea Rovai Well-Known Member

    Joined:
    Oct 27, 2014
    Messages:
    1,703
    Likes Received:
    240
    It's all in the docs, there's a specific section for this here.
     
  3. herionoindo

    herionoindo New Member

    Joined:
    Jul 29, 2016
    Messages:
    23
    Likes Received:
    1
    @Andrea Rovai i was setup output audio, but i still can not hear anything when play music. What else?
     
  4. iddqd

    iddqd Member

    Joined:
    Mar 24, 2014
    Messages:
    56
    Likes Received:
    11
    Hello.
    First - Thank you for the mod.
    Next:
    I try to change hdmi resolution with following command, that shown in docs
    setenv bootargs console=ttymxc1,115200 init=/init video=mxcfb0:dev=hdmi,1366x768M@60,if=RGB24,bpp=32 video=mxcfb1:eek:ff video=mxcfb2:eek:ff fbmem=28M vmalloc=400M androidboot.console=ttymxc1 androidboot.hardware=freescale mem=1024M
    and next write boot and press enter.
    After that android won't boot and I got following error in console:
    [ 4.940644] android_usb: already disabled
    [ 4.945197] mtp_bind_config
    [ 4.948239] init: write_file: Unable to open '/config/usb_gadget/g1/configs/b.1/strings/0x409/configuration': No such file or directory
    [ 4.960518] init: property 'sys.usb.controller' doesn't exist while expanding '${sys.usb.controller}'
    [ 4.969782] init: cannot expand '${sys.usb.controller}' while writing to '/config/usb_gadget/g1/UDC'
    [ 5.696703] binder: 159:159 transaction failed 29189, size 0-0
    Last line is repeating forever.
    What I did wrong?
     
  5. iddqd

    iddqd Member

    Joined:
    Mar 24, 2014
    Messages:
    56
    Likes Received:
    11
    Also. I tried to install gapps, register google account and figured out that performance is terrible. Installation of Google maps tooks several minutes, aps often freezing and so on. (((
     
  6. herionoindo

    herionoindo New Member

    Joined:
    Jul 29, 2016
    Messages:
    23
    Likes Received:
    1
    @Andrea Rovai any way, how to change over SETENV command?
     
  7. Andrea Rovai

    Andrea Rovai Well-Known Member

    Joined:
    Oct 27, 2014
    Messages:
    1,703
    Likes Received:
    240
  8. secuflag

    secuflag Member

    Joined:
    Jul 4, 2016
    Messages:
    42
    Likes Received:
    19
    Ok guys, it's time for updates! Look at the first post.

    Have Fun!
     
    Andrea Rovai likes this.
  9. secuflag

    secuflag Member

    Joined:
    Jul 4, 2016
    Messages:
    42
    Likes Received:
    19
    First post updated.

    Have Fun!
     
    waltervl likes this.
  10. secuflag

    secuflag Member

    Joined:
    Jul 4, 2016
    Messages:
    42
    Likes Received:
    19
    First post updated.

    Have Fun!
     
  11. secuflag

    secuflag Member

    Joined:
    Jul 4, 2016
    Messages:
    42
    Likes Received:
    19
    First post updated.

    Have Fun!
     

Share This Page