CPU fan power plug?

Discussion in 'UDOO X86' started by tonberryhunter, May 3, 2017.

  1. tonberryhunter

    tonberryhunter New Member

    Joined:
    Apr 29, 2017
    Messages:
    12
    Likes Received:
    1
    I want to wire up a fan but the plug header on the board is tiny and nothing like any other boards fan header. Does anyone have a close up photo of the fan plug or a possible form factor?
     
  2. waltervl

    waltervl UDOOer

    Joined:
    Dec 12, 2015
    Messages:
    2,314
    Likes Received:
    580
    All the Udoo X86 connector details are in the user manual pdf that you can download here or here

    Also @Brad figured some buying details (including wired connector) out here
     
    tonberryhunter likes this.
  3. tonberryhunter

    tonberryhunter New Member

    Joined:
    Apr 29, 2017
    Messages:
    12
    Likes Received:
    1
    Couldn't find any info in the manual I had already looked there first before posting. I guess they want you to buy the fan from them rather then diy. Thanks for the link to Brad's post. Looks like I will go that route.
     
  4. waltervl

    waltervl UDOOer

    Joined:
    Dec 12, 2015
    Messages:
    2,314
    Likes Received:
    580
    You overlooked it then, its is on page 33, paragraph 3.3.11 FAN connector
     
    Fuzzyroll likes this.
  5. tonberryhunter

    tonberryhunter New Member

    Joined:
    Apr 29, 2017
    Messages:
    12
    Likes Received:
    1
    [​IMG]
     
  6. Ladislav Mikes

    Ladislav Mikes New Member

    Joined:
    Jun 16, 2017
    Messages:
    1
    Likes Received:
    0
    Just finished wiring a fan using a 1.25mm plug from http://www.ebay.com/itm/152340772599
    (I ordered 4P so i had to snip one box + same seller has 1.25mm pin with wire and sata power connector)
    the thing is, the top view in manual page 33 is wrong, pin1 is actually on the other side (judging from pins being closer to board edge)
    the correct wiring can be seen in at 50 sec (black : gnd, red :+12, rest : tacho)
    so i had to swap gnd with tacho and got it working
     
  7. Jennifertn

    Jennifertn New Member

    Joined:
    Apr 11, 2018
    Messages:
    1
    Likes Received:
    0
    They have shown the details of connector and can also use for fan connector . Its upto us how we need to use it as per our convinience.
     

Share This Page