How have you solved on off? Just solder a

Discussion in 'UDOO X86' started by Triodefreak, May 7, 2017.

  1. Triodefreak

    Triodefreak Active Member

    Joined:
    Jun 7, 2016
    Messages:
    104
    Likes Received:
    30
    On off switch to pin 6 and 8?
     
  2. Kilrah

    Kilrah Member

    Joined:
    Apr 20, 2017
    Messages:
    31
    Likes Received:
    16
    Press the existing power button?
     
  3. Markus Laire

    Markus Laire Active Member

    Joined:
    Mar 9, 2017
    Messages:
    225
    Likes Received:
    91
    Pressing that does nothing.
     
  4. itimpi

    itimpi UDOOer

    Joined:
    Oct 31, 2013
    Messages:
    136
    Likes Received:
    39
    It works OK for me! If the UDOO is powered on with LED green then it is powered off and the LED changes to Amber to indicate power present but UDOO powered off. Pressing it again causes the LED to turn green and the UDOO starts booting. The button is very small, though, so can be a bit fiddly to press.
     
    fabio978 likes this.
  5. Laurence

    Laurence New Member

    Joined:
    May 8, 2017
    Messages:
    2
    Likes Received:
    2
  6. x1800MODMY360x

    x1800MODMY360x Member

    Joined:
    Mar 29, 2017
    Messages:
    55
    Likes Received:
    6
    yes pin 6 is the open and pin 8 is the ground for pin 6 on the header.
     
  7. Triodefreak

    Triodefreak Active Member

    Joined:
    Jun 7, 2016
    Messages:
    104
    Likes Received:
    30
    Could not find that in the user manuals?
     
  8. Kilrah

    Kilrah Member

    Joined:
    Apr 20, 2017
    Messages:
    31
    Likes Received:
    16
    On the board edge right next to the LED.
     
  9. Triodefreak

    Triodefreak Active Member

    Joined:
    Jun 7, 2016
    Messages:
    104
    Likes Received:
    30
    Bummer. I'll have to start soldering then. Since with the supplied enclosure I'll have to get a little rod to push that button.
     
  10. Triodefreak

    Triodefreak Active Member

    Joined:
    Jun 7, 2016
    Messages:
    104
    Likes Received:
    30
    Pity they don't sell connectors for the speakers...and optional frontpanet switches indicators et al...in their own shop. I'm having problems finding the parts...elsewhere.
     
  11. Kilrah

    Kilrah Member

    Joined:
    Apr 20, 2017
    Messages:
    31
    Likes Received:
    16
    I don't need anything to press the power button with the acrylic case. The one on the EDGE, not the top one below the hole.
     
    Triodefreak likes this.
  12. Triodefreak

    Triodefreak Active Member

    Joined:
    Jun 7, 2016
    Messages:
    104
    Likes Received:
    30
    Cool! Thanks. Will check it tonight.
     
  13. LDighera

    LDighera UDOOer

    Joined:
    Jan 13, 2014
    Messages:
    206
    Likes Received:
    36
    If you press the button on the edge below the LED while it is green and fail to see any response, it can indicate that the X86 board is being back-fed through the USB port to which you've attached a separately powered USB hub. To test, disconnect the USB hub, and press On/Off button; the LED should turn amber.
     
  14. Markus Laire

    Markus Laire Active Member

    Joined:
    Mar 9, 2017
    Messages:
    225
    Likes Received:
    91
    I retested power button again and now it is working in Debian Stretch. It didn't work last time I tried, but I don't remember what the exact situation was then.

    Still I prefer to have also additional button on a cable (adafru.it/1125) like what @Laurence showed above so I can cut all power to UDOO X86.
     
  15. fabio978

    fabio978 Member

    Joined:
    Jul 2, 2014
    Messages:
    51
    Likes Received:
    5
    Why soldering? Can't you use a Dupont connector/header? I have added a power button with led (used for HDD activity or Power) like that.
     
    drc85 likes this.
  16. Triodefreak

    Triodefreak Active Member

    Joined:
    Jun 7, 2016
    Messages:
    104
    Likes Received:
    30
    Thank you for that name. Never knew what they were called. I know I have them somewhere in my hobby room.
     
    Last edited: May 9, 2017
  17. fabio978

    fabio978 Member

    Joined:
    Jul 2, 2014
    Messages:
    51
    Likes Received:
    5
    I recycled them for years from old computers, until i decided to search for their actual name ;)
     
  18. thE_29

    thE_29 Member

    Joined:
    May 2, 2017
    Messages:
    34
    Likes Received:
    2
    In that video:
    you can see, that the guy added an "external button". Someone knows where to get something like that?
    Link:
    youtube.com/watch?feature=youtu.be&v=nQQbSBCfm_4
     
  19. x1800MODMY360x

    x1800MODMY360x Member

    Joined:
    Mar 29, 2017
    Messages:
    55
    Likes Received:
    6
    I found the external button but this forum does not like my phone and won't let me paste the link to it. I've search external front panel pc button and got it that way.
     
  20. thE_29

    thE_29 Member

    Joined:
    May 2, 2017
    Messages:
    34
    Likes Received:
    2

Share This Page