Controlling Power / Sleep via ARDUINO 101

Discussion in 'UDOO X86' started by YellowGTM, Oct 4, 2017.

  1. YellowGTM

    YellowGTM Member

    Joined:
    Sep 21, 2017
    Messages:
    56
    Likes Received:
    3
    Good Morning Everyone,

    I'm currently searching your forum and other sources to learn more about the Arduino101 and UDOO
    interface.

    My searches are coming up empty when asking whether we can control and trigger SLEEP MODE and/or
    POWER UP from the integrated ARDUINO 101.

    Are we able to use a GPIO to instruct the UDOO x86 to enter and exit sleep mode? For instance, if a
    voltage was present on an input pin, can we wake the processor using Windows 10?

    Thank you for any tips or reading material that you can share! I'll continue to read the x86 docs, and
    surf the internet for answers. If I find anything, I will update this thread.
     
  2. tuxun

    tuxun Member

    Joined:
    Dec 20, 2013
    Messages:
    67
    Likes Received:
    12
    YellowGTM likes this.
  3. YellowGTM

    YellowGTM Member

    Joined:
    Sep 21, 2017
    Messages:
    56
    Likes Received:
    3

Share This Page