Sorry for the late reply. I bought mine from Microcenter. Here’s a link to it:...
I believe that ridge is to help prevent inserting the connector the wrong way. I’ll have to double check o When I’m home, but I’m pretty sure that...
Looking at the pictures, I believe what you linked to is what the C2 is in his post. Without knowing the dimensions, I can’t say for sure, but it...
I’m almost positive that it’s C2, but I don’t have one in front of me at the moment to compare. I’ll try to look tonight when I’m able to. Or...
It could just be the drive itself. Try a different brand. I’ve had bad luck with Seagate drives in the past. At work, we had over 800 laptops that...
I believe vlc has some controls to adjust the colors, brightness, contrast, etc. Take a look at those and see if this helps.
It needs to be partitioned first. I would try gparted to partition.
I don't believe that there is a setting for 2 or 3 pin fans. I was just asking as part of trying to help troubleshoot. Does your fan turn on at...
This is the reason why I set a 5 second delay for the splash screen so that I have time for the monitor to wake up and for me to decide if I want...
I was having an issue as well (something else not fan related) and a firmware update and bios reset to defaults fixed it for me as well. I know we...
The 2.56ghz is the burst speed. The CPU decides when to speed up and only when needed and only for short periods of time. The base clock of the...
If your fan repeatedly does turn on when you turn on your udoo, then it should be working. I've found that with mine set to 55 for the lowest temp...
The fan turns off automatically after you turn on the udoo. It will then turn on only when needed based on the settings in the bios unless you've...
Take a look in the logs right after the drive disconnects. Paste the specific log messages here. /var/log/messages should be a good starting...
Why do you have to be a follower? Why can't you come up with your own problems? :p
Separate names with a comma.
