Ran this after it finished booting: udooneo-m4uploader /var/opt/m4/m4last.fw and the pin seems to work fine. I'm tempted to put this in my...
I was wondering if it was the serial port last night and had tried to see if removing that would help. Currently it's running this: void setup()...
So it's just generally unstable like that? I guess I could do a work around with a script that runs the arduino compiler and reloads the sketch...
Hi, So I've been working on a robot that uses Redis to communicate between a server and itself. As I was testing this I noticed something odd....
It's an incredibly small speed penalty to use the SD card to transfer to the SATA.
It can be booted from SATA. For example: http://elinux.org/UDOO_boot_from_sata A class 4 is probably provided because it's cheaper than a class 10...
It'll depend on the webcam. Not all work with Linux.
I did. The webcams can not go into a small enough resolution in the MJPG format to work together. Some lower res cameras will be needed.
I had to go to the networking form through the start menu and connect from there. When I select it from the other context menu it will just say...
I'm unsure of what you are trying to say. J24 is the third port. It's a head just behind the serial terminal. When you get the starter kit it...
For future knowledge: Third usb port is on Bus 2. No idea what bus 1 is used for.
Fashioned a makeshift adapter. Third USB port is on Bus 2. So I have no idea what Bus 1 is used for.
Is the third USB port on a separate bus from the other two USB ports? When I run 'lsusb' it shows that the two primary USB, WIFI, and a couple of...
Separate names with a comma.
