It's been a good while, so memory is a bit hazy, but iirc it was due to my gpu having a generic name in the Windows Device Manager which I...
I have two crucial 1 tb m.2 (both a M and a B) and both work. Can't speak directly for the RAM, but it looks like it should work. I went with...
Section 3.1 of the manual will show you the location of the BIOS switch on the bottom of the board, iirc, people who received V8's would sometimes...
Ahhh, I appreciate that, still learning my way around hardware. I'm currently using it for an external GPU, curious to see if my benchmarks will...
How can you tell? I purchased it off ebay and it was listed as a 4x:...
Here are some images with the 2280 m.2 sata ssd being held in place by the nvme in case anyone else is considering going down this road and...
@GerbenT I never dared turn it on with the pressure in place, but I did eventually bite and remove the standoff itself, they appear to be glued in...
Had to use some channel locks, but it twisted right off. Judging by the residue, it appears the standoffs are glued in.
Probably, and looking at it, it does appear it'll be fine, but I have a serious aversion to physically modifying expense hardware without...
Anyone? Guess I'm just going to go for it and hope for the best. Appreciate the response from the team.
Can anyone on the UDOO team let me know whether the standoff is threaded into the board or fused?
The issue is it does touch and even puts some pressure on the ssd, so I'd prefer to remove it.
Whoops, pic didn't attach. [IMG]
I'm using the m.2 key b for a sata ssd, but having trouble finding a 1tb in the 2260 form factor, but the 2280 is long enough I could hold it in...
Separate names with a comma.
