Make sure you run command prompt as administrator, else the updater program will still be running but no actual update.
Finally, with firmware 1.03, you can now set the fan to be permanently on. :) Thanks to Udoo Team.
Yes, the firmware update bundle with softwares that supposedly create custom bios. However, don't have the knowledge to do it by my own....
Just want to fully explore the feature since it is a proper fan connector. The connector is not difficult to find. Some cmos battery on boards are...
Submitted a support ticket to request bios setting for AC1 with lower temperature. Till now no reply. Seems that the comment regarding udoo poor...
I wonder the AC1 settings could have more selection at lower temperature (may be 30°C). Probably this will enable the fan to be permanently on as...
Try that. Still same. I think disabled means fan is disabled totally. :D
Actually I'm connecting with 2 wires 12v/Gnd only. When booting up and entering into the bios setting the fan will turn on with maximum speed....
Seems that the minimum temperature to turn on the fan is at 55°C. Can the fan be turn on permanently?
BTW, how do you mount the fan on the heat sink? Is it just tighten the screw in between the gap of the heat sink fins?
If you connect both hdmi and mini dp to a same monitor, the default is always hdmi. If you use mini dp as the main monitor but the hdmi is plug in...
The update bios is a zip file which contains updater program files for different os. So, you need to extract the correct files for your os...
It is actually quite simple, as instructed in the pdf , item 3 System BIOS update with Windows. Follow steps in 3.1 and you will get it done. Just...
Yes, you can boot from mini dp as the main screen. By default, output to hdmi, dp#1, dp#2 are all enabled in bios.
Last suggestion is to check the connection to the display port (hdmi, mini dp) on board. The hdmi/usb port are quite tight and have to press a...
Separate names with a comma.
