network boot?

Discussion in 'UDOO NEO' started by Xykon, Nov 24, 2015.

  1. Xykon

    Xykon Member

    Joined:
    Nov 1, 2013
    Messages:
    64
    Likes Received:
    20
    Hello,

    Just wondering if I'm doing something wrong or if udoo neo doesn't support booting from network (yet)?
    Also it seems saveenv isn't working in u-boot?

    U-Boot 2014.04-15346-gedd0741 (Oct 27 2015 - 11:18:21)

    CPU: Freescale i.MX6SX rev1.2 at 792 MHz
    CPU: Temperature 45 C, calibration data: 0x5594cc69
    Reset cause: WDOG
    Board: MX6SX UDOO NEO
    I2C: ready
    DRAM: 1 GiB
    MMC: FSL_SDHC: 0, FSL_SDHC: 1
    *** Warning - bad CRC, using default environment

    In: serial
    Out: serial
    Err: serial
    Found PFUZE300! deviceid 0x30, revid 0x11
    Net: CPU Net Initialization Failed
    No ethernet found.
    Normal Boot
    Hit any key to stop autoboot: 0
    => bootp
    No ethernet found.

    => saveenv
    Saving Environment to MMC...
    Writing to MMC(0)...
    The SD card is locked. Can not write to a locked card.

    mmc write failed

    failed
     
  2. Andrea Rovai

    Andrea Rovai Well-Known Member

    Joined:
    Oct 27, 2014
    Messages:
    1,703
    Likes Received:
    240
  3. Xykon

    Xykon Member

    Joined:
    Nov 1, 2013
    Messages:
    64
    Likes Received:
    20
    Thanks... support ticket [304040] created.
     
    Andrea Rovai likes this.
  4. Julio Cruz

    Julio Cruz New Member

    Joined:
    Feb 18, 2016
    Messages:
    12
    Likes Received:
    2
    Any news about network boot?
     
  5. waltervl

    waltervl UDOOer

    Joined:
    Dec 12, 2015
    Messages:
    2,314
    Likes Received:
    580
  6. Julio Cruz

    Julio Cruz New Member

    Joined:
    Feb 18, 2016
    Messages:
    12
    Likes Received:
    2
    Thanks Walter!
     
    Andrea Rovai likes this.

Share This Page