Introduce Yourself

Discussion in 'General Discussion' started by delba, May 8, 2013.

  1. wsurferdude

    wsurferdude New Member

    Joined:
    Oct 27, 2013
    Messages:
    5
    Likes Received:
    0
  2. leotuorto

    leotuorto New Member

    Joined:
    Aug 18, 2013
    Messages:
    1
    Likes Received:
    0
    Hi,
    My name is Leonardo I study electronics in Brazil and I'm interested in use UDOO in my 3D printer.
     
  3. fmotta

    fmotta New Member

    Joined:
    Jun 17, 2013
    Messages:
    5
    Likes Received:
    1
    I am a geek who started in embedded systems in 1981. Now I work with many cores (up to 32 - 48 soon) per processor.
     
  4. juncaofish

    juncaofish New Member

    Joined:
    Aug 8, 2013
    Messages:
    4
    Likes Received:
    0
    I've ordered one UDOO Quad, not received yet.

    Looking forward to your update.
     
  5. roncordell

    roncordell New Member

    Joined:
    Oct 29, 2013
    Messages:
    2
    Likes Received:
    0
    Hi all - just got my UDOO Quad in the mail as a Kickstarter backer. I don't have anything definite planned for it other than to have fun :) I have a couple of RPi's and an Arduino Uno to play with but I'm looking forward to having a little more control and a little more I/O to work with in a single package.

    Cheers!
     
  6. mrx

    mrx New Member

    Joined:
    Oct 23, 2013
    Messages:
    3
    Likes Received:
    0
    Hi guys,

    i'm developing software for 25+ years and currently doing cross-platform stuff in the media industry.
    Been doing hardware stuff ever since.
     
  7. andcmp

    andcmp New Member

    Joined:
    May 8, 2013
    Messages:
    161
    Likes Received:
    0
    Welcome all the new users!
     
  8. casperleenheer

    casperleenheer New Member

    Joined:
    Oct 28, 2013
    Messages:
    11
    Likes Received:
    0
    Hi,

    I'm Casper, quite a noob but in the end I mostly get it to work. At this moment I have a UDOO Quad which doesn't activate my HDMI. Through the serial debug screen I get:

    mxc_hdmi mxc_hdmi: Detected HDMI controller 0x13:0xa:0xa0:0xc1
    fbcvt: 1920x1080@60: CVT Name - 2.073M9
    imx-ipuv3 imx-ipuv3.0: WARNING: adapt panel end blank lines
    imx-ipuv3 imx-ipuv3.0: IPU DMFC DP HIGH RESOLUTION: 1(0,1), 5B(2~5), 5F(6,7)
    mxc_sdc_fb mxc_sdc_fb.1: Can't get fb option for mxcfb1!
    mxc_sdc_fb mxc_sdc_fb.2: Can't get fb option for mxcfb2!
    imx-sdma imx-sdma: loaded firmware 1.1
    mxc_hdmi mxc_hdmi: hdmi read edid failed!!
    mxc_hdmi mxc_hdmi: Read EDID again
    mxc_hdmi mxc_hdmi: hdmi read edid failed!!
    mxc_hdmi mxc_hdmi: No modes read from edid
    mxc_hdmi mxc_hdmi: create default modelist

    I tried:

    Different cables
    Flashed new images on other sd cards

    All my other devices work perfectly with my TV (rPi, PS3, setup box) etc.

    Please help! I l also asked for support 24 hrs ago, still no response....
     
  9. Taillo

    Taillo New Member

    Joined:
    Oct 29, 2013
    Messages:
    10
    Likes Received:
    0
    Hi, I'm Florian.

    I'm French, and sorry for advance for my english !
     
  10. kintera

    kintera New Member

    Joined:
    Oct 28, 2013
    Messages:
    18
    Likes Received:
    0
    Introducing Kasey

    I am Kasey Norman,

    I am a Senior Robotics and Embedded System design student at the University of advancing technologies.
    Through my travels in academia i have picked up a lot of coding skill though grew found of Arduino. I also
    am serious CAD person i love to sit down cad and design stuff then build what I designed, be it 3D print
    CNC mill, Laser cut and good old fashion hand tools. I also have a hand in designing PCBs through hole and SMD.
    Currently I am designing A case for my UDOO quad that includes a fan and SATA mount this design will be shared soon.
    I have built various different robots with all kinds of sensor in all different sizes all ranging from off the shelf parts to all custom
    made/special order parts.

    I will also upload a link to my web page once it is finished with the move to the new domain and revamp.

    Look forward to working with this community.
     
  11. h66

    h66 New Member

    Joined:
    Oct 28, 2013
    Messages:
    4
    Likes Received:
    0
    Hi, My name is H66 and i have an dual core udoo! ;)
     
  12. haf

    haf New Member

    Joined:
    Oct 30, 2013
    Messages:
    2
    Likes Received:
    0
    Hi Everybody,

    I'm Hrvoje from Croatia. I haven't backed Udoo on Kickstarter but I'm planning to get one from their web. I'm finding synergy of Udoo with OwnCloud very interesting. Also I'm interested in crowdfunding, and I'm running blog about CF campaigns from Croatia.
     
  13. esner

    esner New Member

    Joined:
    Oct 30, 2013
    Messages:
    1
    Likes Received:
    0
    Hi all,

    I am Esner and I just received my Quad core Udoo here in the Netherlands! Plugged it in last night immediately to see if I could get it booted. What a nice feeling when seeing the Udoo-Ubuntu appear.

    I have been playing with electronics and coding since primary school. I hope the Udoo will inspire my children to discover the fun of electronics as well.

    Have fun!
     
  14. g.cubed

    g.cubed New Member

    Joined:
    Oct 29, 2013
    Messages:
    9
    Likes Received:
    0
    Hi everyone,

    Canadian tinkerer here. I'm quite new to the world of open hardware, though have been a programmer/administrator on/off for 10+ years. Primary interest is in robotics. Got my UDOO quad yesterday!
     
  15. shinn

    shinn New Member

    Joined:
    Oct 31, 2013
    Messages:
    6
    Likes Received:
    0
    Hi guys,
    I am from Taiwan.I have been a web/win32 programmer/administrator for 8 years. i have Raspberry Pi and Arduino, but there are not good in performance. i got my UDOO quad+dual two days ago!
     
  16. philc79

    philc79 New Member

    Joined:
    Oct 31, 2013
    Messages:
    1
    Likes Received:
    0
    Phil from Houston, Tx. I've yet to play with my Udoo is it still has not arrived. I've sent support requests via website and nothing. I'm losing all faith and on the verge of filing a charge back so I can get my money back. It has been a very disappointing experience. I'm glad everyone else is having fun though! :)
     
  17. azzamite

    azzamite New Member

    Joined:
    Oct 31, 2013
    Messages:
    1
    Likes Received:
    0
    Hello guys

    I'm from Mexico and got the udoo quad :)

    I work on device driver development and was looking for some new toy
     
  18. fasiko

    fasiko New Member

    Joined:
    Oct 31, 2013
    Messages:
    1
    Likes Received:
    0
    My Udoo not start!!

    Moderator: please, create a new topic (I can't)

    See this video:
    https://www.youtube.com/watch?v=dA5KsgGOw5k

    pleasse, ¿what's the problem?

    I conected Udoo quad and linux work ok. I go to chromium to download update #42 (2 minutes of use) and my Udoo stop.

    (sorry for my very bad english)
     
  19. Mikeee

    Mikeee Member

    Joined:
    Nov 1, 2013
    Messages:
    55
    Likes Received:
    17
    Hi everyone. Glad to be part of the Udoo Community. Just got my Quad Udoo and successfully booted both Android and Linux. The first computer I ever owned was a Sinclair ZX81 (kit purchased in 1982).
     
  20. g.wygonik

    g.wygonik New Member

    Joined:
    Nov 2, 2013
    Messages:
    1
    Likes Received:
    0
    I'm gregg, just outside Redmond, Washington. I plan on using my UDOO to miniaturize some of my hardware/software explorations, mostly around interactive music and audio-reactive visualizations (both physical and software).
     

Share This Page