RemixOS fail to detect after reset

Discussion in 'UDOO X86' started by helium7, May 22, 2017.

  1. helium7

    helium7 New Member

    Joined:
    May 22, 2017
    Messages:
    2
    Likes Received:
    0
    Hi all, new to the board and im having an issue i hope someone has a solution. My goal was to install just the RemixOS on the board. Im using the Advance+ with 128gb ssd.

    What i have done so far :
    1) formatted the SSD with bootable gparted to ext4
    2) Download and set up a bootable usb with the Remix_OS_for_PC_Android_M_64bit_B2016112101.iso
    3) Booting the remix usb and under resident mode, i replace "USB_DATA_PARTITION=1" with "INSTALL=1"
    4) From the options i select Install on sda1 , Do not format file system, install/skipped GRUB, enable file system for debugging


    The installation will complete successfully but then it arrive at my nightmare: the launch or reboot screen. If i chose launch, the OS will boot itself and everything work like a charm. However once i off/restart, the board wasnt able to detect the OS and Boot from device will feedback a "no bootable device error" and Boot from file shows an empty screen.

    Im using default setting in SCU. Any tips or advice will be appreciated.
     
    Last edited: May 22, 2017
  2. helium7

    helium7 New Member

    Joined:
    May 22, 2017
    Messages:
    2
    Likes Received:
    0
    Problem resolved, apparently just need to manually install and edit grub cfg with another OS.
     
  3. Alexander Chang

    Alexander Chang New Member

    Joined:
    Apr 27, 2017
    Messages:
    21
    Likes Received:
    0
    Does your wifi work fine after installation of Remix OS?
     
  4. waltervl

    waltervl UDOOer

    Joined:
    Dec 12, 2015
    Messages:
    2,314
    Likes Received:
    580

Share This Page