UDOO BOLT Memory Compatibility List

Discussion in 'UDOO BOLT' started by Stefano Tognon, Apr 16, 2019.

  1. Stefano Tognon

    Stefano Tognon UDOOer

    Joined:
    Nov 10, 2017
    Messages:
    15
    Likes Received:
    3
    In order to help users to get memory that is compatible with the Udoo Bolt, please post in this thread yuor working or not working memory configuration.

    Bolt are claimed to works with:
    2X SLOT SO-DIMM DUAL CHANNEL 64-BIT DDR4 2400 MT/S WITH ECC SUPPORT UP TO 32GB

    Thanks
     
  2. Stefano Tognon

    Stefano Tognon UDOOer

    Joined:
    Nov 10, 2017
    Messages:
    15
    Likes Received:
    3
    From Brian Mengel on Kickstarter:

    Crucial memory kit: CT2K8G4SFD824A

    • Brand: Crucial
    • Total Capacity: 16GB kit (8GBx2)
    • Warranty: Limited Lifetime
    • Specs: DDR4 PC4-19200 • CL=17 • Dual Ranked • x8 based • Unbuffered • NON-ECC • DDR4-2400 • 1.2V • 1024Meg x 64 •
    • Series: Crucial
    • Form Factor: SODIMM
    • ECC: NON-ECC
    • Kit Qty: 2
    • Speed: 2400 MT/S
    • Voltage: 1.2V
    • DIMM Type: Unbuffered
    Working :)
     
    slidvendetta and Chad Ringstrom like this.
  3. Flash2k6

    Flash2k6 New Member

    Joined:
    Jun 14, 2018
    Messages:
    12
    Likes Received:
    8
    Crucial memory kit: CT2K16G4SFD824A

    • Brand: Crucial
    • Total Capacity: 32GB kit (16GBx2)
    • Warranty: Limited Lifetime
    • Specs: DDR4 PC4-19200 • CL=17 • Dual Ranked • x8 based • Unbuffered • NON-ECC • DDR4-2400 • 1.2V • 1024Meg x 64 •
    • Series: Crucial
    • Form Factor: SODIMM
    • ECC: NON-ECC
    • Kit Qty: 2
    • Speed: 2400 MT/S
    • Voltage: 1.2V
    • DIMM Type: Unbuffered
    Confirmed working :)
     
    Rskousen and Chad Ringstrom like this.
  4. ccs_hello

    ccs_hello UDOOer

    Joined:
    Apr 15, 2017
    Messages:
    536
    Likes Received:
    194
    1x 4GB
    Ramaxel 4GB 2133MHz DDR4 PC4-17000 non-ECC Unbuffered 260-Pin Single Rank 1.2V SoDimm OEM Laptop Memory RMSA3230KE68H9F-2133
    $21 shipped around end of November last year.

     
  5. ccs_hello

    ccs_hello UDOOer

    Joined:
    Apr 15, 2017
    Messages:
    536
    Likes Received:
    194
    (follow-up on post #4) CPU-Z reported:
    RMSA3230KE68H9F-2133 (single rank, DDR4-2133, unbuffered, non-ECC)
    1066MHz 15-15-15-36-51-1T @ 1.2V
    actual memory used: Samsung
     
  6. elDaz_2

    elDaz_2 New Member

    Joined:
    Apr 17, 2019
    Messages:
    11
    Likes Received:
    2
    I have 3 different DDR4 sodimm that does not work. I won't list them for now since I am not sure if the RAM modules are incompatible or if my Bolt is just DOA. I should receive a forth (!!!!) RAM module next week. I ordered a Crucial module similar to the one mentioned above so there should be greater chances that it will work.
     
  7. Chad Ringstrom

    Chad Ringstrom New Member

    Joined:
    Apr 17, 2019
    Messages:
    16
    Likes Received:
    13
    Hi Guys,

    I have just successfully booted up with:

    [​IMG]

    Series G.Skill Ripjaws DDR4 SO-DIMM RAM Series
    Part Number F4-2400C16S-16GRS
    Capacity 16GB (1x 16GB)
    Memory Type DDR4-2400 SO-DIMM RAM
    Speed 2400 MHz
    Timings 16-16-16-39
    Rated Voltage 1.2Vdc
    Pins 260-pin DDR4 SO-DIMM

    Thought I would pass on my experience.
    Local cost in Canadian $109
     
    slidvendetta likes this.
  8. SolidGoomba

    SolidGoomba UDOOer

    Joined:
    Apr 17, 2019
    Messages:
    27
    Likes Received:
    13
    Can also confirm success with Crucial memory kit: CT2K16G4SFD824A
     
    Chad Ringstrom likes this.
  9. Jan Mareš

    Jan Mareš New Member

    Joined:
    Apr 18, 2019
    Messages:
    1
    Likes Received:
    1
    I can confirm working memory kit from Kingston : HX424S14IBK2/32
    SO-DIMM 32GB DDR4-2400MHz CL14 HyperX Impact, kit 2x16GB

    Datasheet: https://www.kingston.com/dataSheets/HX424S14IBK2_32.pdf

    First boot took very long time (almost 1 minute), but from DC connector successfully started. From USB-C not.
     
    GerbenT likes this.
  10. Kadel

    Kadel New Member

    Joined:
    Apr 20, 2019
    Messages:
    4
    Likes Received:
    2
    I ordered crucial memory but I got two of this one:
    Micron 4GB (1x4GB) DDR4 Sodimm 2400MHz 260-Pin PC4-19200
    MTA4ATF51264HZ-2G3B2

    so I just give them a try and they work fine, so I have 8 GB running.
     
  11. chrisr

    chrisr UDOOer

    Joined:
    Nov 1, 2013
    Messages:
    27
    Likes Received:
    9
    Confirmed working well
     
  12. GerbenT

    GerbenT UDOOer

    Joined:
    Apr 17, 2019
    Messages:
    24
    Likes Received:
    8
    I have these as well. lowest CL I could find in any module. And also has this CL in the SPD


     
  13. Petr Zahnas

    Petr Zahnas New Member

    Joined:
    May 2, 2017
    Messages:
    6
    Likes Received:
    4
    Using the same, just 2x4GB modules. Working fine at 2400/CL14

     
  14. Obfu

    Obfu New Member

    Joined:
    Jun 13, 2019
    Messages:
    4
    Likes Received:
    0
    I'm running:
    Crucial 16GB Kit (8GBx2) DDR4 2400 MT/S (PC4-19200) SR x8 SODIMM 260-Pin Memory - CT2K8G4SFS824A

    Seems to just be one digit/letter off from that other kit ("FS" instead of "FD".) No problems so far.
     
  15. Kal Sze

    Kal Sze New Member

    Joined:
    Jul 2, 2019
    Messages:
    3
    Likes Received:
    0
    How do we generally choose among RDIMM, UDIMM and LRDIMM?
     
  16. jorgy

    jorgy UDOOer

    Joined:
    Sep 15, 2017
    Messages:
    21
    Likes Received:
    4
    I second that this 32G kit works in my V3 UDOO Bolt perfectly.
     
  17. Akinwale

    Akinwale New Member

    Joined:
    Jul 18, 2019
    Messages:
    4
    Likes Received:
    1
    I can confirm that this works on my V8 Bolt. I pulled it out of an old laptop when I wanted to upgrade its memory to 16GB (single slot).

    SK Hynix HMA41GS6AFR8N-TF 8GB DDR4-2133 SODIMM
     
  18. Zaf9670

    Zaf9670 New Member

    Joined:
    Jul 8, 2017
    Messages:
    5
    Likes Received:
    0
    Just wanted to add an ECC to the list of working memory. I have the V8 UDOO Bolt. I ordered mine from CDW in the US. Part numbers and CDW number below. ECC appears to be working when I did some of the tests shown on Puget systems site. https://www.pugetsystems.com/labs/articles/How-to-Check-ECC-RAM-Functionality-462/

    Kingston Server Premier - DDR4 - 16 GB - SO-DIMM 260-pin - unbuffered
    Mfg.Part: KSM24SED8/16ME | CDW Part: 5083754 | UNSPSC: 32101602

    https://www.cdw.com/product/Kingsto...000&cm_ven=Email&etsi=13892320&etsu=743789001
     
  19. Xanatos

    Xanatos UDOOer

    Joined:
    Jun 5, 2013
    Messages:
    9
    Likes Received:
    1
    I'm also using G.Skill Ripjaws of a different model:

    Series G.Skill Ripjaws DDR4 SO-DIMM RAM Series
    Model F4-2400C16D-16GRS
    Capacity 16GB (2x 8GB)
    Memory Type DDR4-2400 SO-DIMM RAM
    Speed 2400 MHz
    Timings 16-16-16-39
    Rated Voltage 1.2V
    Pins 260-pin DDR4 SO-DIMM
    No ECC / Unbuffered
     
  20. Gerry Havinga

    Gerry Havinga UDOOer

    Joined:
    Jul 25, 2019
    Messages:
    5
    Likes Received:
    0
    I can second that, also using the Crucial CT2K8G4SFS824A and no problems (using Windows 10 Pro).
     

Share This Page