Maximum current from CN25 header

Discussion in 'UDOO BOLT' started by Maximo, Jun 10, 2020.

  1. Maximo

    Maximo UDOOer

    Joined:
    Aug 11, 2017
    Messages:
    18
    Likes Received:
    5
    I want to know how much current can I draw from the 3.3v output (pins 30 and 32) of the Embedded Controller Header CN25, and how much from the individual GPIO pins (13-28)
    I couldn't find the info on the documentation
     
  2. Maximo

    Maximo UDOOer

    Joined:
    Aug 11, 2017
    Messages:
    18
    Likes Received:
    5
    Maybe someone from the team can answer this. @evaloverde :)
     
  3. NickGR

    NickGR UDOOer

    Joined:
    Jun 23, 2020
    Messages:
    105
    Likes Received:
    20
    evaloverde likes this.
  4. Maximo

    Maximo UDOOer

    Joined:
    Aug 11, 2017
    Messages:
    18
    Likes Received:
    5
    But the CN25 is not the Arduino compatible connector (that is CN24), is the Embedded Controller one, so I don't think it has to follow the Arduino board standards.
     
  5. NickGR

    NickGR UDOOer

    Joined:
    Jun 23, 2020
    Messages:
    105
    Likes Received:
    20
    Maximo likes this.
  6. Maximo

    Maximo UDOOer

    Joined:
    Aug 11, 2017
    Messages:
    18
    Likes Received:
    5
    Great. That's for the GPIO pins. Thanks.
    Just need to confirm for the 3.3V pins (CN25 - pin 30 and 32), as I don't know what are those connected to.
     
  7. NickGR

    NickGR UDOOer

    Joined:
    Jun 23, 2020
    Messages:
    105
    Likes Received:
    20
    For those would need the schematics of the board.
     
  8. Maximo

    Maximo UDOOer

    Joined:
    Aug 11, 2017
    Messages:
    18
    Likes Received:
    5
    Yes, that's why I tagged @evaloverde, to see if someone can help us with that info
     
  9. ccs_hello

    ccs_hello UDOOer

    Joined:
    Apr 15, 2017
    Messages:
    536
    Likes Received:
    194
    Pin 30/32 cannot offer lots of current since many of the devices share the same power source which is from RT6575B's internal 3.3V linear LDO regulator (spec'd at 100mA, max 175 mA.) I'd say, do not consume 50mA or more.
     
  10. Maximo

    Maximo UDOOer

    Joined:
    Aug 11, 2017
    Messages:
    18
    Likes Received:
    5
    @evaloverde Would it be possible for someone from UDOO to tell us the max current we can draw from the 3.3v CN25 pin 30 and 32?
     

Share This Page