OpenELEC 5.95.2

Discussion in 'XBMC' started by vpeter, Jun 28, 2015.

  1. sirrab

    sirrab UDOOer

    Joined:
    Jul 26, 2014
    Messages:
    264
    Likes Received:
    32
    What is the multi-channel audio like using the HDMI connector? 5.1? 7.1?
     
  2. sirrab

    sirrab UDOOer

    Joined:
    Jul 26, 2014
    Messages:
    264
    Likes Received:
    32
    I did some research on the iMX6 and found the HDMI output is version 1.4a. Which suggest it has HEC(Ethernet over HDMI), ARC(Audio return channel), CEC(Consumer Electronic Control), up to 8 channels of digital audio(LPCM/192Khz/24 bit audio), and various flavors of video formats. So does the UDOO Quad and OpenELEC output at least Blu-Ray quality video and audio? i.e. 1080, 5.1 audio at least, I'm hoping for 7.1 audio!

     
  3. theGarz

    theGarz New Member

    Joined:
    Dec 21, 2016
    Messages:
    4
    Likes Received:
    0
    Any updates about this topic? I would like to have openelec (not to mention kodi) running on udoo quad. I've dowloaded and flashed the OpenELEC-imx6.arm-5.95.3-udoo_quad-v01 but it doesn't boot (for instance, android booted with the same uSD card). I've tried to download the OpenELEC-imx6.arm-5.95.2-udoo_quad-v01 but i land on a 404 page. Any chance to have a media player SO for the udoo quad? Tks.
     
  4. vpeter

    vpeter Active Member

    Joined:
    Nov 29, 2014
    Messages:
    303
    Likes Received:
    62
  5. theGarz

    theGarz New Member

    Joined:
    Dec 21, 2016
    Messages:
    4
    Likes Received:
    0
    Many thanks, it boots!
     
  6. vpeter

    vpeter Active Member

    Joined:
    Nov 29, 2014
    Messages:
    303
    Likes Received:
    62
    You are welcome.

    There will be no more recent images because support for imx6 was removed in Kodi. Maybe it will be back in 2020.
     
  7. epifanio

    epifanio New Member

    Joined:
    Oct 24, 2013
    Messages:
    5
    Likes Received:
    0
    Hi @vpeter!
    Sorry to bother with this old topic - I am trying to give new life to my udoo-quad and I was trying your image.
    It works great with HDMI :)

    I am now trying to use the lvds, I un-commented the line:
    #video=mxcfb0:dev=ldb,1368x768M@60,if=RGB24,bpp=32
    but I can't get the screen ligthing up (I can feel the touch screen sensor receives power)

    Do you have any hints/suggestion on how to debug it?
    I am now trying to enable debug in the /flash/uEnv.txt and see if by serial I can read any log.

    Thanks!
     

Share This Page