Uboot can't load kernel.. Bad data CRC

Discussion in 'Debian' started by jerrino77, Jan 31, 2014.

  1. jerrino77

    jerrino77 UDOOer

    Joined:
    Nov 25, 2013
    Messages:
    31
    Likes Received:
    1
    Hello, i'm using debootstrap method to install Debian armel image to sd card. Following the guide on eLinux, i have to download uImage from sources and copy it to /boot SD partition. But when i boot, i get "bad data CRC" error.. Why? Kernel load entry point is 10008000, uboot loadaddr is 0x12000000
    Please help me to boot my UDOO!!!
     
  2. jerrino77

    jerrino77 UDOOer

    Joined:
    Nov 25, 2013
    Messages:
    31
    Likes Received:
    1
    Up.. Really? Nobody could help me?
     
  3. miousername

    miousername New Member

    Joined:
    Jun 23, 2013
    Messages:
    73
    Likes Received:
    0
    Hi,

    This uImage is ok? Are you sure that is not corrupted?

    Have you used windows or linux for create the sd card?
     
  4. jerrino77

    jerrino77 UDOOer

    Joined:
    Nov 25, 2013
    Messages:
    31
    Likes Received:
    1
    Hello, i did all from Kubuntu Saucy, following the guide on eLinux. I have mounted sd card, debootstrapped all system, then i have downloaded kernel and modules from udoo download page directly on sdcard (with wget). Sync and umount. But i receive this error. FYI every time i follow this procedure i have this error. Otherwise, if i copy a "precompiled" image with dd command, everything works fine
     
  5. jerrino77

    jerrino77 UDOOer

    Joined:
    Nov 25, 2013
    Messages:
    31
    Likes Received:
    1
    one more thing.. the uImage that i've downloaded seems to be 4.372.753 Byte according to Dolphin. But Uboot tells me this:

    UDOO board => boot
    mmc0 is current device
    ** File not found boot.scr **
    4372753 bytes read in 421 ms (9.9 MiB/s)
    Booting from mmc ...
    ** File not found imx6q-udoo.dtb **
    ## Booting kernel from Legacy Image at 12000000 ...
    Image Name: Linux-3.0.35
    Image Type: ARM Linux Kernel Image (uncompressed)
    Data Size: 4372724 Bytes = 4.2 MiB
    Load Address: 10008000
    Entry Point: 10008000
    Verifying Checksum ... Bad Data CRC
    ERROR: can't get kernel image!

    is there something wrong?
     

Share This Page