Booting Windows from 2280 nvme drive with a BIOS 1.08

Discussion in 'UDOO BOLT' started by Leonardo, Aug 7, 2022.

  1. Leonardo

    Leonardo UDOOer

    Joined:
    Jan 5, 2020
    Messages:
    6
    Likes Received:
    2
    Hi guys,

    Has any of you successfully booted Windows 10 from a 2280 NVME with a BIOS 1.08?
    I am using this:

    Kingston NV1 500GB M.2 2280 NVMe PCIe SSD (SNVS/500G)

    Any tips?
     
  2. ccs_hello

    ccs_hello UDOOer

    Joined:
    Apr 15, 2017
    Messages:
    536
    Likes Received:
    194
    No experience on NV1.
    However, this NVMe SSD is a DRAM-less and endurance is low.
    Does BIOS menu see such SSD's existance?

    DRAMless, if I remembered it right, needs to use system RAM (on the motherboard) as its chche.
    In boot time, some BIOS will not have system DRAM ready for NVMe SSD to use. That would be no good.

    If I were you, try to return it would be my suggestion.
    There is a thread discussing NVMe SSD successfully tested. Please consider those.
     
  3. NickGR

    NickGR UDOOer

    Joined:
    Jun 23, 2020
    Messages:
    105
    Likes Received:
    20
    I have installed windows on my WD Blue SN550 NVMe SSD (WDS100T2B0C) which is DRAM-less and it is showing in BIOS (1.08) and working properly.
     
  4. Leonardo

    Leonardo UDOOer

    Joined:
    Jan 5, 2020
    Messages:
    6
    Likes Received:
    2
    thanks for your responses guys! The BIOS (1.08) is able to recognize my NVMe. I just could not see it in the bootable options.
     

Share This Page