sketchup 3D model with bigger heatsink

Discussion in 'UDOO BOLT' started by schepers_cp, Aug 14, 2018.

  1. schepers_cp

    schepers_cp Member

    Joined:
    Apr 4, 2014
    Messages:
    32
    Likes Received:
    6
    here's a sketchup warehouse link for the bolt (working for both v3 and v8) with a scythe kodati cpu heatsink mounted instead of the stock heatsink.

    i had to adapt the mounting position of the cpu heatsink a bit to give clearance for the ram slots. those mounting studs can be 3D printed by shapeays for example, and mounted by some self tapping pc screws (the ones usually used for 3.5inch hard disks are the best for this)

    https://3dwarehouse.sketchup.com/model/61b2fed5-5a21-4f86-9574-067cf850bde7

    in there is a 3D render and live preview of the model, please note that dimensions are somewhat unaccurate still, as it can be hard to base the design off photos only.

    yours, ramon schepers.
     
    Mikko Makela likes this.
  2. hhtmp88

    hhtmp88 UDOOer

    Joined:
    May 24, 2016
    Messages:
    52
    Likes Received:
    1
    can your designed heatsink be actually manufactured?
     
  3. NickGR

    NickGR UDOOer

    Joined:
    Jun 23, 2020
    Messages:
    104
    Likes Received:
    20

Share This Page