TFTP Boot - Problems with dhcp in uboot

Discussion in 'Troubleshooting' started by indianerjones, Mar 10, 2014.

  1. indianerjones

    indianerjones New Member

    Joined:
    Mar 10, 2014
    Messages:
    18
    Likes Received:
    1
    Hi guys,

    I am trying to boot a Udoo Quad using TFTP. However, dhcp in uboot does not seem to work. I can't get an IP address. This is the error I get:
    Code:
    MX6Q UDOO U-Boot > dhcp
    FEC: Link is Up ffff
    BOOTP broadcast 1
    TX timeout packet at 27836c00
    BOOTP broadcast 2
    TX timeout packet at 27836c00
    BOOTP broadcast 3
    TX not ready
    TX timeout packet at 27836c00
    BOOTP broadcast 4
    TX not ready
    TX timeout packet at 27836c00
    This occurs on the stock uboot from http://sourceforge.net/projects/minimal ... p/download as well as
    a custom arch linux uboot from http://archlinuxarm.org/platforms/armv7/freescale/udoo
    What might be the problem here? I already checked all external factors, changed cables, etc.

    Booting from the SD card and then getting an IP with the local linux kernel active works. Also, another board (RIoT) is booting via TFTP in the same network just fine.
     
  2. indianerjones

    indianerjones New Member

    Joined:
    Mar 10, 2014
    Messages:
    18
    Likes Received:
    1
    Nevermind, it works using the most recent sources from official uboot repository.
     

Share This Page