3D-Printserver UDOO Quad -> Debian wheezy armHF

Discussion in 'Debian' started by udoo-reprap, Apr 16, 2014.

  1. udoo-reprap

    udoo-reprap New Member

    Joined:
    Feb 4, 2014
    Messages:
    8
    Likes Received:
    0
    Ciao,
    http://sourceforge.net/projects/udoorep ... rce=navbar
    http://sourceforge.net/projects/udooreprap/files/

    Download (Files) -> un "ZIP" -> Win32DiskImage (32GB SD-Cart) write -> SD-Card plug in UDOO Quad slot and Power on.
    If you are in the same LAN, open Browser http://udoo-reprap and the registration of OpenMediaVault must have on the screen.
    Openmediavault http://udoo-reprap user= admin password = reprap
    OctoPrint http://udoo-reprap:5000 user = udoo password = reprap
    Webmin https://udoo-reprap:10000 user = root password = reprap
    VNC-Viewer-5.1.0-Windows-64bit vpn user = reprap
    putty udoo-reprap Port:22 user = root password = reprap

    To install the Services is your Job :)

    CAUTION:
    No support of LCD + touch, no HDMI, no webcam support and SATA could run, but not tested.
    Cura and Slic3r only on commandline - OpenGL GLX is not because the GPU driver module-core does not yet work on armhf.
    http://forums.reprap.org/read.php?336,340416
     
  2. andcmp

    andcmp New Member

    Joined:
    May 8, 2013
    Messages:
    161
    Likes Received:
    0
    Great work udoo-reprap! Could you add a little introduction to you work? I guess there are many UDOO users that could be interested but with little knowledge on the topic.

    Thanks!
     
  3. udoo-reprap

    udoo-reprap New Member

    Joined:
    Feb 4, 2014
    Messages:
    8
    Likes Received:
    0
    This is a beta.
    The Hardware not work with debian armHF (GPU, HDMI, WEBCAM ...)
    I will try to configure this solution with Linaro Ubuntu 12.04 LTS
    If the OpenGl is working, and i can Plug the 7" Touch-Display and the Webcam ant a Sata SSD, than I make the Documentation.
    I concentrate now to make a stable rel. :)
    If you have specific Questions, please write me an E-Mail angelo@abcona.de
     

Share This Page