Recent Activity

Activity stream for all registered members at UDOO Forum.

  1. ccs_hello replied to the thread Bolt PCI Device and Com Port 1 and 2.

    COM3 is USB-serial (emulated com port) which came from on board Arduino Leonardo. COM1 and COM2 came from Ryzen Embedded APU (the main...

    Oct 23, 2019 at 3:33 PM

  2. rotorbudd replied to the thread Script for automatic UdooX86 BIOS upgrade to 1.06 version.

    Just went ahead and updated per the linux instructions in the download. Worked fine.

    Oct 23, 2019 at 3:32 PM

  3. ccs_hello replied to the thread Power supply compatibility list.

    Does it say 19V 4.74A (or similar)? If true, and with a light-blue plug, most likely it will work. YMMV

    Oct 23, 2019 at 3:23 PM

  4. ccs_hello replied to the thread Power supply compatibility list.

    That burnt area is a zero ohm resistor (serving as a poorman's fuse) on the HDMI port. It seems that the power surge came in from the...

    Oct 23, 2019 at 3:21 PM

  5. rotorbudd liked Robert Pearson's post in the thread A Simple Case Mod You May Like to Use.

    I bought a box of M3 spacers from amazon for $14us. I can make it stand 3 feet tall if I want... If the Udoo shop ever gets up and...

    Oct 23, 2019 at 2:41 PM

  6. rotorbudd liked itimpi's post in the thread A Simple Case Mod You May Like to Use.

    I got one of these kits that did not cost much:...

    Oct 23, 2019 at 2:41 PM

  7. rotorbudd liked waltervl's post in the thread A Simple Case Mod You May Like to Use.

    Here you can download the cutting files of the acrylic casing: https://www.udoo.org/docs-x86/Hardware_Reference/Resources.html

    Oct 23, 2019 at 2:41 PM

  8. rotorbudd liked FirstGenGeek's post in the thread A Simple Case Mod You May Like to Use.

    I always liked the new UDOO X86 case design because I knew I could either stack multiple case bottoms; or simply replace the risers to...

    x86a1.jpg x86b1.jpg Oct 23, 2019 at 2:39 PM

  9. ccs_hello replied to the thread Disable Arduino LED.

    The default (came with the factory pre-programmed) Arduino program loaded is called "blinker" (blink every one second.) You can...

    Oct 23, 2019 at 2:39 PM

  10. Zgembo liked Deluxe's post in the thread What do you do with your Bolt?.

    Same here, I have no use for Bolt until fan issue and IOMMU are fixed in BIOS.

    Oct 23, 2019 at 2:03 PM

  11. daveculp replied to the thread What do you do with your Bolt?.

    I am going to be using mine in some robotics projects with my middle school students.

    Oct 23, 2019 at 1:50 PM

  12. evaloverde replied to the thread How reliable is the x86 II?.

    Hey, Craig, I've replied in another post you made. Just in case, I'm going to paste the answer here, because as Latins used to say...

    Oct 23, 2019 at 11:24 AM

  13. evaloverde replied to the thread Appalling Customer Service from Udoo.

    Ciao Craig, thank you for raising the issue. Could you please let me know (privately) your ticket number to check on the situation?...

    Oct 23, 2019 at 11:21 AM

  14. waltervl replied to the thread A Simple Case Mod You May Like to Use.

    Here you can download the cutting files of the acrylic casing: https://www.udoo.org/docs-x86/Hardware_Reference/Resources.html

    Oct 23, 2019 at 11:14 AM
Show older items
Loading...