I`ve tracked down the problem with my dvb-t adaptor being the kernel external modules, to make it work you needed to make the modules internal , I...
Re: I`m putting the bunny back in the box. I THINK I MAY HAVE FOUND THE PROBLEM I may have dvb-t working soon ..
Re: I`m putting the bunny back in the box. Thank you , I`ll try that and report back if I get any joy . I have the firmware file somewhere , but...
Re: I`m putting the bunny back in the box. tvheadend-dvb-kernel-t1516.html Yep , that`s the problem , there is a problem with the software at...
Re: I`m putting the bunny back in the box. Any chance of getting a fully working kernel where if you add a nic / dvb-t adaptor it works be...
HOWs that possible ? it`s almost impossible to get 700 Mb/s between two super fast i7 cpus. Why !!!! Isn`t the udoo gigabit Ethernet limited...
Re: I`m putting the bunny back in the box. That`s what they said about betamax v vhs, it`s not the best specifications which wins every time,...
I think I`m to the point of giving up on the udoo , which has so much potential ,but anything like this relies on the community and support. I lot...
Not the problem. Still can't get any t.v adapter to work. It's not making /dev/dvb As anyone got it to work?
I think I`ve found the problem . lsmod give no output , so no module loaded !!!! I`ve going to try the debian images again to see if lsmod work...
wow , no one as every tried the yocto image !!!!!!!
# # Sample configuration file for the Samba suite for Debian GNU/Linux. # # # This is the main Samba configuration file. You should read the #...
Does udoo_quad_revC_yocto_09072013.img work ? I`ve downloaded it and unzipped the image without fault , but tried to write in to 2 sd card with...
Are you using a sd card and what class ? and using a Gigbbit switch. on a sata ssd drive I`m getting 35 meg / sec using samba .
Copy and paste each line one by one !!! setenv sataroot "/dev/sda1" setenv satadev 0 setenv satapart 1 setenv loaduimagesata 'ext2load sata...
I should be :- setenv sataargs 'setenv bootargs console=${console},${baudrate} root=${sataroot} ${hdmi_patch} fbmem=24M...
What do I need to set up in the kernel for dvb-t ? I have it working on my cubietruck by default and if I add a device / boot up I get this :-...
Normal i2c chips like the mcp23008/16/17 work in python smbus as they should , but after checking it looks like there is a fault with the wire...
As a sort of follow on , I`ve found if you want to use python on connect to your arduino in slave mode and control it like a normal i2c chip you...
use the usb serial connection ( cn6 ) , that may just you a clue why and whats happening !!!!!
Separate names with a comma.
