I had the same problem.!!!!! I connected a mouse / keyboard / monitor at first for a few hours then went headless for the next 2 weeks until I...
I would check var/logs and look for any errors , because you may find that the problem could be a fault with your sd card etc . I`ve installed...
Have you tried making a new image just to see if your image is corrupted ?. I had problems the other day after doing a reboot , and things...
You monitoring the micro usb ( cn6 ) to see if you get passed uboot or is it a uboot problem ?
I use a 2.5 inch laptop drive connected by a sata to sata lead, and it`s working quite well, faster and more stable than a sd card , but if you...
Re: UDOO - Sheet metal case For the fan what about using a voltage regulator like the L7805 and power from a 12v rail ?
saveenv is a uboot command . So to use it , power up while monitoring the micro usb / cn6 and press any key before the 5 second runs out and it...
Sorry , but the above code is now good, no freeze I`ve uploaded the code with the result of 1234.567 been displayed on the monitor , repeated...
You are not taking the big hint on the debug window . sketch_may15a.ino: In function 'void loop()': sketch_may15a:10: error: 'Delay' was not...
Re: getting i2c_1 working My code is still flashing away !!! oops , I`ve made a mistake which you documented , but It`s only just clicked ....
Re: getting i2c_1 working Now you have put me on the right track that i2c_2 is the only port working by default or can be made to work now , I`m...
Look in :- http://www.udoo.org/downloads/ Documentation and there are the PDFs for the 2 panel they sell .
Re: How can I get Debian Desktop Wheezy 1.1 to use network t I had the same problem that the time was in UTC , but can`t remember how I fixed it...
Re: getting i2c_1 working This is my simple test using a mcp23017 chip and a led / resistor and going to leave it flashing to it`s self all night...
I tried pip install smbus and got this :- Could not find any downloads that satisfy the requirement smbus No distributions at all found for smbus...
I think it`s just a cable unless it a touch panel which looks like it as a extra board . http://shop.udoo.org/eu/catalog/product ... ategory/3/...
Re: getting i2c_1 working That sounds promising and a good working test, it looks like you have had better luck than me trying i2c_1 I`ve...
Re: How can I get Debian Desktop Wheezy 1.1 to use network t apt-get install ntpdate date -s "11/20/2014 12:48:00" hint :- date -s...
Re: getting i2c_1 working This is what I`ve found on the plugs for the udoo :- post1926.html#p1926 How ?
Separate names with a comma.
