Chromium Web browser is giving me some grief. Unable to connect to www.google.ca or www.google.com because of this SSL connection error. Deleted...
Just got a chance to try out the PHP Bidirectional Example and it works great. I originally wanted to use UART6 and the A9 for this project but...
Yes that is exactly what I want to try to do but fell down the rabbit hole with stty not accessing the port. So will ignore the stty issue and...
Thanks for the reply. I'm able to access the port with cu and with the Arduino IDE Serial monitor. My goal is to use Apache2 web server and php to...
I have been trying to get access to a serial port from the A9. The command sudo stty -F /dev/ttyMCC 9600 Fails with the following error stty:...
Just tried to download the lastest image of the UdooNeo OS and get the error "Unexpected end of archive" when trying to open it. Download is from...
That twi interface library definitely looks like a good direction. Update here or start a new thread. I'm sure a lot of people are interested...
This post on the Adafruit Forum sort of lays this problem to rest. The Arduino Due Wire library is suspected as cause of these problems....
Yikes!!! From the look of that connector the polarity might be reversed. The schematic shows pin 1 is +12V. You have the red wire going to pin...
Yes please do let us know what you find if anything. I discovered the same thing with the motor modulation sometimes it just takes off wildly or...
It certainly looks like a wire library problem but can't say for sure. Just that the problem definitely exists on the Arduino Due board and the...
Re: no serial devices found for "/dev/tty[ASU]*" Was wondering about that [open 9999( it didn't seem to make sense. Will use [open( from now on....
Well I'm not happy with what happened while testing. The motor test was running on the UDOO and all of a sudden it stopped dead. The SCL1 and...
Yes I do have the newer Motor Shield V2 and it has been modified for 3V logic (cut 5V connection/solder 3V logic select). No pullup resistors...
Re: no serial devices found for "/dev/tty[ASU]*" Rather than upload my test program try downloading the Smart Theremin project. Take a look at...
Exactly. Perhaps I gave Kelley too much information.
Re: no serial devices found for "/dev/tty[ASU]*" I get the same error message whenever loading the program but the port still opens and...
Hmm that is interesting what is the difference between yours and mine? After reading your message I immediately installed the adafruit Motor...
Re: no serial devices found for "/dev/tty[ASU]*" I get the same error with the devices message command. Still able to open the /dev/ttymxc3 port...
I like that fix. Disconnect 5V from the entire shield and operate with 3.3V. You will never feed higher than 3.3V into UDOO. Might pick up one of...
Separate names with a comma.
