Search Results

Search Again
Page 3 of 3
  1. Mikeee
    Post

    Udoo Buttons

    Take a look at these schematics from the download area. http://udoo.org/download/files/schematics/UDOO_REV_D_schematics.pdf Page 2 has the...
    Post by: Mikeee, Mar 28, 2014 in forum: General Discussion
  2. Mikeee
    Post

    Udoo Buttons

    The short answer is No. Its a momentary type of button that is used to create a pulse not to physically connect power.
    Post by: Mikeee, Mar 25, 2014 in forum: General Discussion
  3. Mikeee
    Post

    Udoo Buttons

    Well more precisely its an On/Off button for the SNVS circuit not physical power connection to the board. There is much about this circuit I...
    Post by: Mikeee, Mar 24, 2014 in forum: General Discussion
  4. Mikeee
    Post

    Joystick shield?

    Looking at the schematic for the Joystick board the momentary buttons connected to D3 to D6 are just grounding those pins which would be safe for...
    Post by: Mikeee, Mar 21, 2014 in forum: General Discussion
  5. Mikeee
    Post

    Adafruit Motor Shield V2 is not working with Udoo

    Okay I will test with the Arduino IDE provided with the Udoo Image but this has been a problem for me in the past so do all of my testing with an...
    Post by: Mikeee, Mar 20, 2014 in forum: Troubleshooting
  6. Mikeee
    Post

    Adafruit Motor Shield V2 is not working with Udoo

    From the information in your message the Motorshield should work on UDoo with the mods you have done. How are you uploading the code to the...
    Post by: Mikeee, Mar 20, 2014 in forum: Troubleshooting
  7. Mikeee
    Post

    Udoo Buttons

    That link to the manual is just for a 4 page pamphlet. The link below is for the actual Processor Application Manual. Its over 5000 pages so be...
    Post by: Mikeee, Mar 20, 2014 in forum: General Discussion
  8. Mikeee
    Post

    Adafruit Motor Shield V2 is not working with Udoo

    Here is a link to the schematic for the Motor Shield on the Adafruit Web site. http://learn.adafruit.com/assets/9536
    Post by: Mikeee, Mar 19, 2014 in forum: Troubleshooting
  9. Mikeee
    Post

    Adafruit Motor Shield V2 is not working with Udoo

    I'm also programming the DUE with an external computer not using the Arduino IDE on the UDoo. Picked up an Arduino Due board just to help solve...
    Post by: Mikeee, Mar 19, 2014 in forum: Troubleshooting
  10. Mikeee
    Post

    Udoo Buttons

    Sorry should have included the link when I mentioned the manual. Found the manual on the Freescale web site....
    Post by: Mikeee, Mar 19, 2014 in forum: General Discussion
  11. Mikeee
    Post

    udoo no boot start

    Hi mil, I have recently experienced the same issue with my Udoo. Previously it booted up no problem. Now the only way I can get it to boot up...
    Post by: Mikeee, Mar 19, 2014 in forum: General Discussion
  12. Mikeee
    Post

    Udoo Buttons

    Checking the schematics shows the large button is connected to D12 which is ON/OFF control of SNVS. The IMX6DQ manual Chapter 57 gives a complete...
    Post by: Mikeee, Mar 19, 2014 in forum: General Discussion
  13. Mikeee
    Post

    Adafruit Motor Shield V2 is not working with Udoo

    Hi Apurba, I have just got an Adafruit Motor Shield V2 to work with Udoo. Not sure if this helps but I cut the trace that configures the...
    Post by: Mikeee, Mar 19, 2014 in forum: Troubleshooting
  14. Mikeee
    Thread

    How to restore symbolic link /dev/ttyS0

    After programming with external PC the symbolic link between /dev/ttymxc3 and /dev/ttyS0 is lost. Is there a way to restore the link without...
    Thread by: Mikeee, Dec 21, 2013, 0 replies, in forum: General Programming Discussion
  15. Mikeee
    Post

    Introduce Yourself

    Hi everyone. Glad to be part of the Udoo Community. Just got my Quad Udoo and successfully booted both Android and Linux. The first computer I...
    Post by: Mikeee, Nov 1, 2013 in forum: General Discussion
Find older messages
Showing results 41 to 55 of 55
Search Again
Page 3 of 3