cat /sys/devices/virtual/thermal/thermal_zone0/temp Have a read of Draco's post @ viewtopic.php?f=2&t=155 if this is a topic of interest.
If it had an uncompressed 4GB size, someone might comment that's too big for a 2GB card! I believe the decision to size for an 8GB card is the...
In reverse order... Vivante designed the graphics accelerators (they are Fabless, like ARM so they just do the designs). On the Quad that is...
Thanks Taylo1g for reporting back. :-) Hopefully others will now be able to complete their installations and report back. A few more details...
Great, many thanks Wally :-)
Team UDOO were asked about vibration/stress tests (iirc) and they seemed open to the idea. I don't know how different a board has to be from a...
Yep, armhf but alas it doesn't seem to have graphical hardware acceleration (blame Vivante of course). The link bugmenot posted is it armhf or...
Re: Raspberry Pi compatibility ? - Mathematica & Wolfram Alp From what I recall Wolfram did the porting of their own products, with the view...
I can't check atm (on phone) but if you've checked the pinouts and documentation then you just need to map the pin function. The getting started...
Now that is good news. I'll be trying that out. Wonder if it's armhf or armel, and what have they done for hardware acceleration I wonder?
Agreed, sounds like you should try out a minimal debian.
Well I don't know about a refund, that's up to Team UDOO. However given deliveries normally have been occurring in their thousands within 2-3...
Re: I am kickstarter backer and I still do not get my UDOO q Well now you've posted on these forums you'll get a quick response. Much better to...
To avoid confusion, which pin numbers are you trying? Pin function is somewhat abstracted from pin number.
That's great to hear. Can you post exactly what you resolution was (for confirmation) please.
boot pins.. the resistors you mean. Hmm, I see your point. Still if you're brave you can alter those (assuming you don't value the warranty).
Have a look at http://www.freescale.com/webapp/sps/sit ... _Tools_Tab and there are Freescale documents and posts about it.
Which Pins are you trying to use? Have you changed their 'function' from the default behaviour (EG GPIO) to I2C?
Separate names with a comma.
