Sorry I`ve never tried the android image so I may be wrong , but as far as I know udoo android uses uboot for booting , therefore with any image...
I would say your answer is a usb ethernet dongle. If you guess want more ports on the imx6 side.
In one word , WHY ? There just isn`t enough processing power with a arduino . To need a giga bit connection you will need a system with inbuilt...
SOLVED-ish : getting i2c_1 working Tried compiling with the 1.0 beta image on sd card ... compiled first time with a working and tested i2c bus ,...
Re: getting i2c_1 working I`m going to start with a fresh sd version of 1.1 and if that don`t work try 1.0. another fact which I don`t know if...
Re: getting i2c_1 working Yes I`m on the "udoo_quad_debian_wheezy_armhf_v1.1.zip" image. root@Udoo:/mnt/kernel# gcc -v Using built-in specs....
Re: getting i2c_1 working I keep downloading a new copy of the kernel source tree. I know it works if I don`t make any changes to the...
Re: getting i2c_1 working I think my udoo hates me. I`ve tried again still kernel panic with your files ... , I added the arch = arm after it...
Re: getting i2c_1 working Thanks for the files , I found about the not been able to attach c and h and txt file too. From my records this is...
Re: getting i2c_1 working I will have to try and compile the kernel again , but I`ve tried 3 or 4 times before without any luck. when I did a dry...
Re: enabling serial ports It may not be what you asked for , but before I purchased the udoo & cubietruck I was using the sheevaplug which does...
Re: getting i2c_1 working I think there is a fault somewhere in the kernel than if you try making it a i2c pin it really mixes up the compile. I...
Re: getting i2c_1 working My support ticket is now a month ago without reply, on getting i2c working on the imx6 side. I`ve tried that :- As a...
Are you on Ubuntu or Debian ?
Good Luck , my support ticket is a month old now without a reply.
Re: enabling serial ports Can I read and write on serial ports with arduino, and send data from/to the imx6? I would say it`s very easy to do...
Re: enabling serial ports Sorry , but I wouldn`t trust anything which is in the manual about getting the extra serial ports or the i2c working. I...
I had the same problem with my cubietruck so it's not restricted to the udoo. The way I got around it was using different programs and using usb...
I would say myself, yes and no. You can't use the sd image made for the raspberrypi and use it with the udoo. But it looks like kano is debian...
Any advice.? My advice is..... If you can just use the sd card for uboot and mount the rootfs and data on sata drive. That way it will be...
Separate names with a comma.
