Does the relay have a diode across the coil to stop back emf ? , or is a just a voltage drop spike causing your problem.
From what I can work out it is a compile a new kernel job .
What SD card are you using ? a class 4 or a class 10
I don`t think any of the above sizes of case , atx , itx is a standard where the port are in the same place on every board. It`s a development...
Look at :- sata-port-multiplier-question-t1247.html From my memory sata and esata are basically the same , I think that esata has a higher...
I`ve seen the same thing using mbed , where a mbed become a HID controller , But you are wanting the multi-core linux side to become the HID...
It`s been said on here and the due forum , some part of the wire library does not work / are missing . The i2c_scanner does not work , but most of...
I`m waiting for my udoo to be returned , so I can`t tell you which modules to install or where in the menu system it is , But the HID , which is a...
I think I`ve seen this question on other development board forums like the sheeevaplug , where people tried , but in the end failed to get it...
Wow , back to the "Can I boot direct to the sata without the sd card" , sounds like that should be placed in the FAQs , because it keeps getting...
Easy or hard depending on your situation !!!!! You need to add uImage and the modules to the rootfs , which has not been use to boot from. eg ,...
As long as the monitor supports 1080p (1920 x 1080) It will display on anything . By monitor res is only 1680 x 1050 , but works with the 1080p...
Re: Questions about wifi module and SD card After you have set them up , Wifi and Ethernet are basically the same , just two different methods to...
apt-get install build-essential libncurses5-dev git clone https://github.com/UDOOboard/Kernel_Unico kernel cd ~\kernel make ARCH=arm...
The maximum current supply by a standard usb is 500ma , and 2.5 inch drive work without a extra psu , therefore a 2.5 inch uses last than 500ma ,...
Wow , I didn`t think the udoo was kickstarted until late April 2013 and I was only just able to get one. The Raspberry is the most popular...
I can`t see it anywhere , but don`t think it`s that high , my guess would be around 200-300ma spare , if that. I guess the only way to know is...
I had the same problem with the sata plug , I didn`t think it was a standard jst plug because I couldn`t get it to fit. It should be a two pin...
Re: Questions about wifi module and SD card I may be having problems with "lost in translation" I`m not sure what you mean !!!!! Getting access...
Like normal the best way to know what`s happening is the log files.
Separate names with a comma.
