^ Great information, thanks @Patola!
I would suspect there's paste between the heatsink and CPU(s)
Thanks, I'll be taking using this shortly!
Re: RAM Missing.... 621.6mb RAM ??? @Roberto I'll likely give this a try Thursday, next day I'm really available unfortunately - the wait is...
Re: RAM Missing.... 621.6mb RAM ??? @Roberto - that's great! So it seems it was just a typo when building uBoot?
Thanks @mkopack I'll check that out :)
Re: Boot from SATA drive Excellent, that's exactly what I'm looking for! :)
Re: RAM Missing.... 621.6mb RAM ??? Great, thanks @andcmp!
Thanks for the additional information @evilpenw1n :) And I confirmed that creating a symlink fixed it and it opened the serial port (and was...
Thanks for the tip @tibmeister. I'll check out the enclosure you mentioned - using the other link as a template for cutting the enclosure with a...
Re: RAM Missing.... 621.6mb RAM ??? Agreed, that'd be really nice to be able to do In the meantime with the SD Card being the primary (only?)...
Re: RAM Missing.... 621.6mb RAM ??? I have a class 10 32GB SD Card and it's still very slow to swap to. When copying the image (using diskimager...
just joined in as the same username :)
Re: RAM Missing.... 621.6mb RAM ??? I'm unsure if swap on an sd card is bad either, but I did the same - I never did check to see that the total...
That's what it sounds like to me as well. I'd almost consider flashing the image online onto the SD Card, it'd be much quicker, if you have an SD...
Ah alright, I'm unsure what the issue may be then - you're right, if it boots Linux there shouldn't be a power supply issue then
@Solardave1 - to be sure, are you using a 12v, 2A power supply/connector? And the correct SD image? I had to get my own power connector and...
fwiw - using the v1.2 for quad I was able to login to guest and change ubuntu's password in the terminal upon startup. I did, however, notice that...
Re: RAM Missing.... 621.6mb RAM ??? Agreed. I'm not sure why so much seems to be missing here
Wow that is really cool! That's a great start. I also have no CAD experience, though. Even what is shown in that link I think is a very good...
Separate names with a comma.