Hi, yes the A62 is delivred with a working image (ubuntu 11 ) in emmc. For the second question it's yes also (you can use the image give by udoo here.
Hi CounterC, i build this morning the yocto image (seco guideline), to have the same conf than you. In the build directory i have this file...
Why did you switch to HOB ? Otherwise, did you already boot the card with a sdcard (use BSP4.0 of seco) ? Do you configure the boot (to boot on...
Hi, i would like to enable espci2 (A9 side) that is disabled for the moment : from imx6sx-udoo-neo-externalpins.dtsi in :...
After a little test, lvds7 inchs work, just need to add some adjustment (see git issues). About Qt, touch not working for the moment (with lvds7)....
Hi CounterC, could you precise which branch (jethro ...)of yocto you build ? Do you use Seco guide or Graugans ?
No problem, i will do this in future ...;) let me know if it's that you want https://github.com/graugans/meta-udoo/issues/3
Hi graugans, very goog job, the M4 works now :cool: just a point to verify-> your script create the folder /var/opt/M4 but i need to put manually...
I use windows:eek: and linux :) tomorrow i can send you this informations !
Another time thanks for this ;) I will try tomorrow and let you know !
Hi graugans, the A9 boot but it seems that the M4 doesn't ! I have enabled it in Uenv.text but it stay halt ! If i plug the sd with udoobuntu2 the...
repo sync bb copie to sd All seems ok, i will test tomorrow !
No problem ! take your time ;) your work is already so amazing :D
Graugans, you can find the log here : first, boot with functional sd (ubuntu 11.10) second boot with your yocto layer The difference with...
Great ! Do i need to recompil yocto or can i write it directly on the sd (/boot i presume ?)
Compilation works without error, good job. The (neo) card boot but i think the M4 is not started and impossible for the moment to upload with...
bb in working ... for info, when i start a bitbake, i have this warning WARNING: Getting checksum for qtwebengine SRC_URI entry...
perhaps the problem could be the format of the sd card. Under the format of the ubuntu image that boot on seco (they have only one partition in...
yes, this will be the solution !;)
yes, arduino ide can't establish connexion ! perhaps they need to add FOTA to the image ? Otherwise, i have seen that if i program (blink exemple)...
Separate names with a comma.
