Did you look at this forum thread? https://www.udoo.org/forum/threads/installing-win10-to-the-emmc.6878/
Normally they will give an opportunity to subscribe to a pre-ordering in a couple of weeks. Prices are not set yet I read in another thread. As...
This is a very old topic about the Udoo Dual/Quad board. This board has a wider voltage input range than the Udoo x86 you are referring to.
If you are using pin 9 then that is the same pin that can trigger on/off the sleep mode of the braswell side if the Udoo X86. If you do not want...
Here is a screw type example https://m.ebay.co.uk/itm/Black-Red-Screw-Shield-Assembled-Terminal-Expansion-Board-Proto-Type-For-Arduino-/152464599899
You can buy arduino prototype shields. They can also be bought with screw connections if you do not want to solder. Example:...
Did you try another USB port? Is your device manager complaining about an unknown device?
Did you install the correct win7 driver version (32 or 64 bit)?
You will have to digg into the Intel documentation of processor/GPU of the Ultra. In the following topic it has been discussed briefly...
It is a special cable, see also https://www.udoo.org/forum/threads/sata-cable-data-power.700/
If you look here https://shop.udoo.org/eu/quad-dual.html you see that only the Udoo Quad has a Sata connector, the Dual and Dual Basic version of...
By the way, you are reacting on a Udoo dual/quad board topic but you use a Udoo x86. So it is better to start a new topic in that forum if you...
Use an USB hub with external power supply? The board can only supply limited power to it's peripherals. So if you have extensive requirements use...
Did you already look here: https://www.udoo.org/the-udoo-case-collection/ These ar all for the Quad
Here is a proposal: https://www.udoo.org/forum/threads/dual-wifi-antenna-mounting-suggestions.6994/
No, the Quad has no M2 connector, only normal SATA. You could do something like this:...
What Windows version did you install? You need an x64 version. See also...
I have seen some comments of @jas-mx about the upload of the Arduino binary during boot is not completely correct. This could be a feasible...
This looks like a bug in the Arduino implementation. @Laura Can you or one of the Udoo engineers look into this? I am in a relocation so all my...
Generally it should not be unstable but the Neo Arduino part has some differences from a normal Arduino. Also the M4 (arduino) pins are shared...
Separate names with a comma.
