In Ubuntu 16.04 LTS (default installation) there is, so you have to search why Fedora is not supporting gpio by default. udoox86@UDOO-x86:~$ ls...
Password of root should be "ubuntu" If you fail to login (especially with default user udooer) it looks like something went wrong with...
Also check out the Other Resources section of the website with 3D files, detailed schematics etc: https://www.udoo.org/other-resources/
I would change the heatsink (buy a new lower one or just shorten the existing one). Make sure you have a cpu fan available!
You should be able to set the password with the web control panel: https://www.udoo.org/docs/Basic_Setup/Web_Control_Panel.html Menu...
It looks like the Udoo fan is the source of this strange behavior. Another 3 wire CPU 12V fan is giving no problems: Fan : What is the maximum...
OK thanks, it looks like the Udoo fan is the source of this strange behavior.
Just a stupid question: did you order a Udoo X86 with eMMC? And did you receive one with eMMC? Are the chips there? There are Udoo's without eMMC.
Thanks! From your first post it is not clear (for me :) ) if you connected it with 2 wires or 3? The 3th wire is an rpm sensor that gives...
Welcome! It is shared memory and probably faster than normal serial. I did not test the max speed, you are free to do so :) . I do not think the...
Can you reset your board with the RTC battery sequence, It could be that UEFI is remembering things: If that is not helping please open a ticket...
Do you see the strange fan behavior (changing frequently rpm during operation) in your configuration like we see on the Udoo Fan?...
I am not a Linux expert but perhaps it is easier to just reset everything: erase all partitions on EMMC and other drives, reset bios to default...
His Bios is on V1.0.1. So no flash bios thing.... And USB is switched of so no mouse, keyboard and USB drive boot possibilities. Also no option to...
What if you press on ESC during boot of the X86 (a lot of times to not miss the window) you get the UEFI Firmware Setup Utility Menu Click on Boot...
It is enabled by default. Just follow the instructions on that GPIO page to read for example gpio350: cat /sys/class/gpio/gpio350/value For more...
@Laura Why no answer yet? It will all depend of the load but an estimation of number of hours/days/weeks should be possible.
Very very cool!
There are 4 pwm channels on the Arduino 101, on pin 3, 5, 6 and 9. If the pwm quality is not that much important (ie driving an LED) you could...
Are you sure you did connect them to the Braswell pins (outer side) and not on the Arduino pins (inner side)? Be aware that Braswell is 1.8V !!...
Separate names with a comma.
