I once created two tutorials for the Udoo Neo meant for beginners who just bought a Neo and want to connect it to the Internet and want to see...
It appears not. I believe because the Curie has 2 CPU's and the CPU that is controlling the USB is not the CPU that is doing I/O. They (Intell)...
it appears you are using avrdude, so you didn't select the correct board from Tools/Board menu [IMG] Simply select "Arduino/Genuino 101" and you...
Did you use this image where you experienced those problems? LibreELEC (Krypton) v8.0.1 MR
I think that green line can be solved with settings in the TV itself.
Please share the results if someone managed to find a good working sketch/library for the barometer, gesture or light brick. I believe Udoo has a...
As I don't have those bricks I cannot give you working code. You have to search and try the results found yourself. The scanner code can help you...
I did some more testing: Fan not aimed at CPU so not cooling: same strange behaviour (variable speed) at 50% or 75% fan speed setting in bios. At...
OK, I did some testing too on a Humidity Brick. It is working for me but with some small hurdles: 1. Connected to the Udoo X86 and run the...
Can you please run this scanner sketch, it will tell what I2C devices are connected to the Arduino:...
page 16 of that barometer brick pdf: The standard 7-bit I2C slave address is 0x60 or 1100000. 8-bit read is 0xC1, 8-bit write is 0xC0. I think...
Did you exchange the cable with another one? Did you update the Intel video driver to the latest? The issues with not working TV screens is only...
I see the Udoo team is looking on the forum too, there is a Bricks section added here...
And why is there no Bricks section in https://www.udoo.org/docs-x86/Arduino_101_(Intel_Curie)/Overview.html ?
I must say the usage of the bricks is not very well documented. You have to get through a lot of pages to find basic information like: Where to...
Are you on the latest uefi firmware (1.0.3) ? Then you can control the fan with settings. But it will always run during boot or uefi/bios edit....
Good work, thank you!
It is not yet documented for the Udoo X86 so you are free to do it for us. It has nothing to do with the Arduino part. It is just Linux only. It...
You have to create a user group, give that group the proper access to the gpio folders through the udev rules and add your user to the group. For...
Those are the pins for the PC part of the Udoo X86 (the outer pins of the headers) The Arduino pins are on the inside:...
Separate names with a comma.
