That doesn't look promising. In the web config page it should work. Are you sure you have a Neo with sensors? The Neo Basic does not have sensors....
You should not create those folders, the implementation should have created these folders for you. If you have created them yourself it will not...
What also helps us to wait or skip with sending data from Arduino to A9 until you are sure you are reading the data on the A9 side. Then there is...
Looks like it but you better look here: https://www.udoo.org/other-resources/ (and select Udoo Quad/Dual)
What UEFI firmware version are you on? v1.0.1 has USB/SD card issues so you have to be on at least v1.0.2. And what if you are not stubborn and...
Looks like the firmware has an issue with your monitor. Can you connect another type of monitor (TV?) on this port to test?? The same happens with...
Did you install third party software during the install? https://tutorials.ubuntu.com/tutorial/tutorial-install-ubuntu-desktop#4
Did you use windows to create the USB Ubuntu? Did you use Rufus to create the Image on the USB stick? See also this tutorial:...
Please tag @Jon West as he is the developer of this Bliss Rom for Udoo X86. See also...
The post I linked to is outdated but stll valid. What do you need? An I2C connection? Then you probably (I am not an expert on PinMuxing) have to...
See also post #21, SOLVED-ish - getting i2c_1 working There is also an I2C-3 that can be used on the IMX6 side
I am not completely sure, but you cannot have and SPDIF and I2C functionality on the same pin on the same time, you have to choose. Perhaps use...
You can enable i2c1 much easier with the Device tree editor: https://www.udoo.org/docs/Cookbook_Linux/Device_Tree_Editor.html It is available on...
On what side of the Udoo do you want to connect the Rotary encoder (PC side or Arduino Side)? On what Udoo (Neo, Quad, X86) and on what OS is it...
There is, you can set options in UEFI. But no instructions yet how to use. It is holiday in Italy.
It could (but firmware v1.0.1 is old) but also a firmware update sets everything in Bios back to factory settings.
Using Linux updater, gcc compiler and Kernel-headers are needed and every operation must be done with root/administrator privileges. So you need a...
Yes, all three versions have LVDS output. https://www.udoo.org/udoo-neo/ And No, only Udoo LVDS screens are supported. If you don't use touch you...
The best approach for you is to install Windows 10 on your SATA SSD (connected with the Udoo SATA cable).
Microsoft normally does not allow Windows 10 to be installed on an USB Disk (or eMMC or SD Card). There is an installation method that is...
Separate names with a comma.
