Thanks!
You can use a 12V 2A power connector. It is probably even better as the power through USB only is very limited. See also...
You need an SD card with Udoobuntu 2.x It will boot the Neo and create the network connection through USB. I am not sure if this works with...
Does your Neo boot properly if not connected to USB? Do you see the Neo desktop when connected to a HDMI monitor (TV)? Or with wired LAN can you...
Did you try another USB cable? Another USB port?
Next to the Arduino web IDE solution you could install a second OS (ie Ubuntu) and use the Arduino IDE on that. After uploading the compiled...
I think when you use an external PC to compile an upload to the Quad you can use the latest IDE. If you use the internal IDE you have to use the...
A SATA output connector has to carry at least 1,5A also on 12V even if it is not used. So this would increase the total potential power supply...
Check this: Supplying power to 3.5 inch hdd
Strange, how do you connect to the internet? With wifi/lan/USB Direct? USB Direct can be troublesome. Is there a firewall in your network that...
You have to search on the forum, I believe someone showed his solution for supply 12V to an external hard disk.
Hi, this hard disk is running on 12V but the Sata power connector on the Udoo X86 is only supplying 5V ( see the hardware user manual on page 30)....
What disks did you attach to the SATA connectors? What OS (Windows, Ubuntu) are you trying to install? Did you follow the getting started...
Perhaps try with a fresh install with the latest image from the Udoo website (on another SD card). Your changes could interfere with the default...
By me on Udoobuntu 2 the time sets itself correctly automatically after each boot. Perhaps you have to set your time zone through the Udoo web...
When I run sudo vainfo on Ubuntu 16.04 with updated drivers I get: error: XDG_RUNTIME_DIR not set in the environment. libva info: VA-API version...
Did you update the drivers? https://01.org/linuxgraphics/downloads/intel-graphics-update-tool-linux-os-v2.0.2 Edit: For the old Ubuntu 14.04...
The bug is that if you put the Braswell in a sleep/hibernate state the Arduino 101 stops working. In that case the Arduino 101 is not able to know...
Firmware Bug alarm As it is not working correctly yet I dont think anyone could know the answer. Perhaps an Udoo Engineer could explain what...
Separate names with a comma.
